Preparation of core-shell structured particle and its application in toughening PA6/PBT blends

Combining the excellent mechanical strengths of polyamide 6 (PA6) with the low water absorption of poly(butylene terephthalate) (PBT) was supposed to be a feasible way to prepare a high comprehensive performance material. However, the poor compatibility between PA6 and PBT resulted in low-notched impact strength of PA6/PBT blends. Poly(n-butyl acrylate)/poly(methyl methacrylate-co-methacrylic acid) (PBMMA), a core-shell structured modifier with controlled particle sizes, was prepared by seed emulsion polymerization and confirmed by Transmission electron microscope (TEM). The PBMMA particles as toughening modifier and compatilizer were employed to toughen PA6/PBT blends. The notched impact strength of the PA6/PBT blends was significantly increased and the water absorption was reduced with the addition of PBMMA particles. With 23.0wt% modifier loading, the notched impact strength of the blends was 25.66kJ/m(2), which was 4.04 times higher than that of pure PA6/PBT. Meanwhile, the water absorption of the blends was only 1.3%, dropping 53.6% compared with pure PA6 and reducing by 26.6% than PA6/PBT. Scanning electron microscope results showed that the PBMMA particles were dispersed in the PA6/PBT blends homogeneously, and the toughening mechanism was the cavitation of rubber particles and shear yielding of the matrix. Thermo-gravimetric analysis analysis demonstrated that the compatibility between PA6 and PBT was improved with the addition of core-shell PBMMA particles. The core-shell particles could be used as an effective modifier to achieve the high toughness and low water absorption for PA6/PBT blends. Copyright (c) 2016 John Wiley & Sons, Ltd.