Dynamic response of a geared rotor-bearing system under residual shaft bow effect

被引:0
|
作者
Shiau, T. N. [1 ]
Lee, E. K. [1 ]
Chen, Y. C. [1 ]
Young, T. H. [1 ]
机构
[1] Natl Chung Cheng Univ, Dept Mech Engn, Chiayi 621, Taiwan
关键词
residual shaft bow; phase angle; gear mesh; mass unbalance; transmission error;
D O I
暂无
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
The paper presents the dynamic behaviors of a geared rotor-bearing system under the effects of the residual shaft bow, the gear eccentricity and excitation of gear's transmission error. The coupling effect of lateral and torsional motions is considered in the dynamic analysis of the geared rotor-bearing system. The finite element method is used to model the system and Lagrangian approach is applied to derive the system equations of motion. The dynamic characteristics including system natural frequencies, mode shapes and steady-state response are investigated. The results show that the magnitude of the residual shaft bow, the phase angle between gear eccentricity and residual shaft bow will significantly affect system natural frequencies and steady-state response. When the spin speed closes to the second critical speed, the system steady state response will be dramatically increased by the residual shaft bow for the in-phase case. Moreover the zero response can be obtained when the system is set on special conditions.
引用
收藏
页码:1225 / 1231
页数:7
相关论文
共 50 条
  • [1] Reduction of the Vibration Response of a Geared Rotor-Bearing System with Residual Shaft Bow by Optimization
    Chen, Ying-Chung
    Kang, Chung-Hao
    Choi, Siu-Tong
    JOURNAL OF THE CHINESE SOCIETY OF MECHANICAL ENGINEERS, 2015, 36 (06): : 471 - 480
  • [2] Reduction of the vibration response of a geared rotor-bearing system with residual shaft bow by optimization
    Chen, Ying-Chung
    Kang, Chung-Hao
    Choi, Siu-Tong
    Journal of the Chinese Society of Mechanical Engineers, Transactions of the Chinese Institute of Engineers, Series C/Chung-Kuo Chi Hsueh Kung Ch'eng Hsuebo Pao, 2015, 36 (06): : 471 - 480
  • [3] Dynamic analysis of a geared rotor-bearing system with viscoelastic supports under the bow effect
    Shiau, T. N.
    Lee, E. K.
    Young, T. H.
    Hsu, W. C.
    PROCEEDINGS OF THE ASME TURBO EXPO 2007, VOL 5, 2007, : 923 - 930
  • [4] Effect of residual shaft bow on the dynamic analysis of a double-stage geared rotor-bearing system with translational motion due to shaft deformation
    Chen, Ying-Chung
    ADVANCES IN MECHANICAL ENGINEERING, 2019, 11 (05)
  • [5] Dynamic Effect of Bearing Wear on Rotor-Bearing System Response
    Chasalevris, Athanasios C.
    Nikolakopoulos, Pantelis G.
    Papadopoulos, Chris A.
    JOURNAL OF VIBRATION AND ACOUSTICS-TRANSACTIONS OF THE ASME, 2013, 135 (01):
  • [6] Dynamic analysis of a spiral bevel-geared rotor-bearing system
    Li, M
    Hu, HY
    JOURNAL OF SOUND AND VIBRATION, 2003, 259 (03) : 605 - 624
  • [7] Dynamic response analysis of rotor-bearing systems with cracked shaft
    Mohiuddin, MA
    Khulief, YA
    JOURNAL OF MECHANICAL DESIGN, 2002, 124 (04) : 690 - 696
  • [8] Dynamic analysis of gear-rotor system with viscoelastic supports under residual shaft bow effect
    Kang, C. H.
    Hsu, W. C.
    Lee, E. K.
    Shiau, T. N.
    MECHANISM AND MACHINE THEORY, 2011, 46 (03) : 264 - 275
  • [9] Effect of shaft manufacturing bending deviation on dynamic response of geared rotor system
    Guo, Dong
    Shi, Xiaohui
    Wang, Yawen
    Sun, Guohua
    ADVANCES IN MECHANICAL ENGINEERING, 2016, 8 (10): : 1 - 13
  • [10] Dynamic analysis of a helical geared rotor-bearing system with composite rotating shafts
    Chen, Ying-Chung
    Cheng, Xu Feng
    Choi, Siu-Tong
    AIRCRAFT ENGINEERING AND AEROSPACE TECHNOLOGY, 2021, 93 (10): : 1699 - 1708