Five-axis Machining Tool Vector Control of Impeller

被引：0
|
作者：
Zhao Can [1 ]
Sun Jianfeng [1 ]
Bu Guangbin [2 ]
机构：
[1] Heilongjiang Coll Sci & Technol, Coll Mech Engn, Harbin 150027, Peoples R China
[2] Nanjing Univ Aeronaut & Astronaut, Coll Mech & Elect Engn, Nanjing 210016, Peoples R China
来源：
PROGRESS OF MACHINING TECHNOLOGY | 2009年 / 407-408卷
关键词：
Impeller; Tool-path planning; Collision-free; Linear interpolation; ORIENTATION;
D O I：
10.4028/www.scientific.net/KEM.407-409.264
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
There are two key problems in the manufacture process of impeller, one is the collision of tool and blade, the other is gnawed-cutting arisen by non-uniform change of the cutter axis. UG software was used to solve those problems. Tool tip position was solved by UG. The control algorithm of collision-free cutter-axis was described and applied. The cutter-axis vector was optimized by quaternary linear interpolation method to make normal vector of blade changing continuous, so. These methods were synthetically used in the manufacture experiment. The impeller produced by it was qualified. It indicated that the method of tool vector control was feasible.
引用
收藏
页码：264 / +
页数：2
相关论文
共 50 条
  • [1] Investigation of tool orientation for milling blade of impeller in five-axis machining
    Kuan-Hung Chen
    [J]. The International Journal of Advanced Manufacturing Technology, 2011, 52 : 235 - 244
  • [2] Investigation of tool orientation for milling blade of impeller in five-axis machining
    Chen, Kuan-Hung
    [J]. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2011, 52 (1-4): : 235 - 244
  • [3] Five-axis machining used for impeller repair
    Bokulich, F
    [J]. AEROSPACE ENGINEERING, 1998, 18 (05) : 16 - 17
  • [4] Solid Modeling and Machining Approach of the Impeller Based on Five-Axis Machine Tool
    Zhao, Yuxia
    Di, Jiejian
    Gao, Dewen
    [J]. MANUFACTURING PROCESS TECHNOLOGY, PTS 1-5, 2011, 189-193 : 801 - 804
  • [5] A five-axis rough machining approach for a centrifugal impeller
    H.-T. Young
    L.-C. Chuang
    K. Gerschwiler
    S. Kamps
    [J]. The International Journal of Advanced Manufacturing Technology, 2004, 23 : 233 - 239
  • [6] A five-axis rough machining approach for a centrifugal impeller
    Young, HT
    Chuang, LC
    Gerschwiler, K
    Kamps, S
    [J]. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2004, 23 (3-4): : 233 - 239
  • [7] A five-axis rough machining approach for a centrifugal impeller
    [J]. Chuang, L.-C. (d87522020@ntu.edu.tw), 1600, Springer-Verlag London Ltd (23): : 3 - 4
  • [8] Five-axis machining and impeller Vericut simulation optimization
    Xiao, Shan Hua
    Zhou, Wen Chao
    Fu, Gui Xing
    [J]. FRONTIERS OF MANUFACTURING SCIENCE AND MEASURING TECHNOLOGY III, PTS 1-3, 2013, 401 : 155 - 158
  • [9] Tool Path Planning and machining experiment for a centrifugal impeller based on five-axis machine tool
    Zhao, Yuxia
    Di, Jiejian
    Gao, Dewen
    [J]. MECHATRONICS AND INTELLIGENT MATERIALS, PTS 1 AND 2, 2011, 211-212 : 629 - 633
  • [10] A Tool Path Control Algorithm Based on Tool Orientation Vector Interpolation in Five-Axis CNC Machining
    Geng Cong
    Min Li
    Wei Chunyu
    [J]. PROCEEDINGS OF 2016 SIXTH INTERNATIONAL CONFERENCE ON INSTRUMENTATION & MEASUREMENT, COMPUTER, COMMUNICATION AND CONTROL (IMCCC 2016), 2016, : 570 - 573
12345