Robust Optimization and Kriging Metamodeling of Deep-Drawing Process to Obtain a Regulation Curve of Blank Holder Force

被引:17
|
作者
Palmieri, Maria Emanuela [1 ]
Lorusso, Vincenzo Domenico [1 ]
Tricarico, Luigi [1 ]
机构
[1] Polytech Univ Bari, Dept Mech Math & Management, Via Orabona 4, I-70125 Bari, Italy
关键词
sheet metal forming; deep-drawing; kriging metamodeling; multi-objective optimization; FE (Finite Element) AutoForm robust analysis; defect prediction;
D O I
10.3390/met11020319
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
In recent decades, the automotive industry has had a constant evolution with consequent enhancement of products quality. In industrial applications, quality may be defined as conformance to product specifications and repeatability of manufacturing process. Moreover, in the modern era of Industry 4.0, research on technological innovation has made the real-time control of manufacturing process possible. Moving from the above context, a method is proposed to perform real-time control of a deep-drawing process, using the stamping of the upper front cross member of a car chassis as industrial case study. In particular, it is proposed to calibrate the force acting on the blank holder, defining a regulation curve that considers the material yield stress and the friction coefficient as the main noise variables of the process. Firstly, deep-drawing process was modeled by using commercial Finite Element (FE) software AutoForm. By means of AutoForm Sigma tool, the stability and capability of deep-drawing process were analyzed. Numerical results were then exploited to create metamodels, by using the kriging technique, which shows the relationships between the process parameters and appropriate quality indices. Multi-objective optimization with a desirability function was carried out to identify the optimal values of input parameters for deep-drawing process. Finally, the desired regulation curve was obtained by maximizing total desirability. The resulting regulation curve can be exploited as a useful tool for real-time control of the force acting on the blank holder.
引用
收藏
页码:1 / 16
页数:15
相关论文
共 50 条
  • [1] ON THE ACCEPTABLE BLANK-HOLDER FORCE RANGE IN THE DEEP-DRAWING PROCESS
    YOSSIFON, S
    SWEENEY, K
    AHMETOGLU, M
    ALTAN, T
    [J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 1992, 33 (1-2) : 175 - 194
  • [2] Optimization of Segmented Blank Holder Shape and Its Variable Blank Holder Gap in Deep-Drawing Process
    Srirat, Jirasak
    Yamazaki, Koetsu
    Kitayama, Satoshi
    [J]. JOURNAL OF ADVANCED MECHANICAL DESIGN SYSTEMS AND MANUFACTURING, 2012, 6 (04): : 420 - 431
  • [3] Control of draw-in in the deep-drawing process by regulating the force on the blank holder
    Palmieri, M. E.
    Tricarico, L.
    [J]. INTERNATIONAL DEEP-DRAWING RESEARCH GROUP CONFERENCE (IDDRG 2022), 2022, 1238
  • [4] Optimization of the loading curve of variable blank holder force in deep drawing
    Zhu, W
    Lou, ZL
    Zhang, ZL
    [J]. PROCEEDINGS OF THE 1ST INTERNATIONAL CONFERENCE ON NEW FORMING TECHNOLOGY, 2004, : 453 - 458
  • [5] Optimization of Initial Blank Shape with a Variable Blank Holder Force in Deep-Drawing via Sequential Approximate Optimization
    Srirat, Jirasak
    Kitayama, Satoshi
    Yamazaki, Koetsu
    [J]. JOURNAL OF ADVANCED MECHANICAL DESIGN SYSTEMS AND MANUFACTURING, 2012, 6 (07): : 1093 - 1106
  • [6] Effect of blank holder force control in deep-drawing process of magnesium alloy sheet
    Yoshihara, S
    Manabe, K
    Nishimura, H
    [J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2005, 170 (03) : 579 - 585
  • [7] Fuzzily control blank holder force in the process of blank deep drawing
    Zhu, W
    Dong, XH
    Zhang, ZL
    [J]. PROCEEDINGS OF THE INTERNATIONAL CONFERENCE ON MECHANICAL ENGINEERING AND MECHANICS 2005, VOLS 1 AND 2, 2005, : 196 - 202
  • [8] Finite element simulation of deep-drawing process with multi-point blank holder
    [J]. Suxing Gongcheng Xuebao/Journal of Plasticity Engineering, 2002, 9 (02):
  • [9] DETERMINATION OF BLANK HOLDER FORCE IN SHEET METAL DEEP DRAWING PROCESS
    Y.J.Luo
    Y.Q.Zhang
    D.N.He
    [J]. Acta Metallurgica Sinica(English Letters), 2003, (01) : 31 - 34
  • [10] An analysis of the spreading of a holding pressure by means of a pliable blank holder with the controllable holding force during a deep-drawing process
    Jerman, B
    Hodnik, R
    Kramar, J
    [J]. STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERING, 2001, 47 (02): : 83 - 93