Warpage Analysis on Thin Shell Part using Response Surface Methodology (RSM)

被引：0
|
作者：
Arulmullai, R. [1 ]
Nasir, S. M. [1 ]
Fathullah, M. [1 ]
Rashidi, M. M. [2 ]
Noriman, N. Z.
机构：
[1] Univ Malaysia Perlis, Sch Mfg Engn, Kampus Tetap Pauh Putra, Arau 02600, Perlis, Malaysia
[2] Univ Malaysia Perlis, Fac Technol, Kampus Uniciti Alam Sg Chuchuh, Padang Besar U 02100, Perlis, Malaysia
来源：
GREEN DESIGN AND MANUFACTURE: ADVANCED AND EMERGING APPLICATIONS | 2018年 / 2030卷
关键词：
TAGUCHI METHOD; OPTIMIZATION;
D O I：
10.1063/1.5066809
中图分类号：
X [环境科学、安全科学];
学科分类号：
08 ; 0830 ;
摘要：
Injection moulding process is widely used to produce plastic parts. Plastic injection moulding process is known for its ability to produce parts with small thickness and highly complex at a low cost. The most common defect in this injection moulding industry is warpage. In overcoming this defect, several studies had been conducted in the effort of minimising the defect. By using simulation and optimisation method it will help to obtain an appropriate processing parameters without consuming a lot of time and money. A simulation was built using Autodesk Moldflow Insight 2012 in order to define the suitable injection moulding parameter. Response Surface Methodology (RSM) optimisation method was conducted using the Design Expert software to determine the significance of parameter and also the optimum value of a warpage. The most significant parameter in this study is melt temperature and by using the RSM optimisation method, the value of warpage able to reduce 13.54%.
引用
收藏
页数：9
相关论文
共 50 条
  • [1] Warpage Analysis on Thin Shell Part using Response Surface Methodology (RSM)
    Zulhasif, Z.
    Shayfull, Z.
    Nasir, S. M.
    Fathullah, M.
    Hazwan, M. H. M.
    [J]. 3RD ELECTRONIC AND GREEN MATERIALS INTERNATIONAL CONFERENCE 2017 (EGM 2017), 2017, 1885
  • [2] Warpage Optimisation on Thin Shell Part by using Response Surface Methodology (RSM)
    Norshahira, R.
    Shayfull, Z.
    Nasir, S. M.
    Fathullah, M.
    Hazwan, M. H. M.
    [J]. 3RD ELECTRONIC AND GREEN MATERIALS INTERNATIONAL CONFERENCE 2017 (EGM 2017), 2017, 1885
  • [3] Warpage Optimization on Thin Shell Part (Below 2mm) Using Response Surface Methodology (RSM)
    Syazwani, N.
    Nasir, S. M.
    Fathullah, M.
    Hazwan, M. H. M.
    Noriman, N. Z.
    [J]. GREEN DESIGN AND MANUFACTURE: ADVANCED AND EMERGING APPLICATIONS, 2018, 2030
  • [4] Optimisation of Warpage on Thin Shell Plastic Part Using Response Surface Methodology (RSM) and Glowworm Swarm Optimisation (GSO)
    Asyirah, B. N.
    Shayfull, Z.
    Nasir, S. M.
    Fathullah, M.
    Hazwan, M. H. M.
    [J]. 3RD ELECTRONIC AND GREEN MATERIALS INTERNATIONAL CONFERENCE 2017 (EGM 2017), 2017, 1885
  • [5] Optimization of Warpage on Plastic Part by Using Response Surface Methodology (RSM)
    Nabila, W. P. N.
    Nasir, S. M.
    Fathullah, M.
    Shuaib, N. A.
    Irfan, A. R.
    [J]. 5TH INTERNATIONAL CONFERENCE ON GREEN DESIGN AND MANUFACTURE 2019 (ICONGDM 2019), 2019, 2129
  • [6] Warpage Minimization: Analysis using Response Surface Methodology (RSM) and Particle Swarm Optimization (PSO) on Thin Part
    Yasiin, A.
    Fathullah, M.
    Shayfull, Z.
    Nasir, S. M.
    Hazwan, M. H. M.
    Sazli, M.
    Yahya, Z. R.
    [J]. 3RD ELECTRONIC AND GREEN MATERIALS INTERNATIONAL CONFERENCE 2017 (EGM 2017), 2017, 1885
  • [7] Optimization of Warpage on Plastic Part by Using Response Surface Methodology (RSM)
    Hidayah, M. H. N.
    Shayfull, Z.
    Noriman, N. Z.
    Fathullah, M.
    Norshahira, R.
    Miza, A. T. N. A.
    [J]. GREEN DESIGN AND MANUFACTURE: ADVANCED AND EMERGING APPLICATIONS, 2018, 2030
  • [8] Warpage Analysis of Thick Shell Part (Thickness Above 2mm) By Using Response Surface Methodology (RSM)
    Sim, Y. S.
    Nasir, S. M.
    Fathullah, M.
    Irfan, A. R.
    Shuaib, N. A.
    [J]. 5TH INTERNATIONAL CONFERENCE ON GREEN DESIGN AND MANUFACTURE 2019 (ICONGDM 2019), 2019, 2129
  • [9] Applying Response Surface Methodology (RSM) in Optimizing Warpage of a Thin Injection Moulded Part
    Yasiin, A.
    Fathullah, M.
    Shayfull, Z.
    Nasir, S. M.
    Hazwan, M. H. M.
    Shazzuan, S.
    [J]. 3RD ELECTRONIC AND GREEN MATERIALS INTERNATIONAL CONFERENCE 2017 (EGM 2017), 2017, 1885
  • [10] Optimisation of Process Parameters on Thin Shell Part Using Response Surface Methodology (RSM)
    Faiz, J. M.
    Shayfull, Z.
    Nasir, S. M.
    Fathullah, M.
    Rashidi, M. M.
    [J]. 3RD ELECTRONIC AND GREEN MATERIALS INTERNATIONAL CONFERENCE 2017 (EGM 2017), 2017, 1885
12345