Tool wear and tool life in end milling of 15-5 PH stainless steel under different cooling and lubrication conditions

被引：40
|
作者：
Braghini Junior, Aldo [2 ]
Diniz, Anselmo Eduardo [1 ]
Teixeira Filho, Fernando [3 ]
机构：
[1] Univ Estadual Campinas, Dept Mfg Engn, Fac Mech Engn, BR-13083970 Campinas, SP, Brazil
[2] Fed Technol Univ Parana, BR-84016210 Ponta Grossa, PR, Brazil
[3] Ctr Fed Educacao Tecnol CEFET MG, Dept Mfg Engn, BR-37026340 Varginha, Brazil
来源：
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY | 2009年 / 43卷 / 7-8期
关键词：
Stainless steel; End milling; Cutting fluid; Wear mechanisms;
D O I：
10.1007/s00170-008-1744-6
中图分类号：
TP [自动化技术、计算机技术];
学科分类号：
0812 ;
摘要：
Most of the machining operations on stainless steel alloys are carried out with cutting fluid due to the poor machinability of this kind of material. Tool wear mechanisms are directly influenced by the cooling and lubrication condition to which the tool is exposed, especially in interrupted cutting processes. This work investigates tool wear mechanisms for an end milling operation of a precipitation-hardened martensitic stainless steel under four different cooling and lubrication conditions. The results demonstrated that the cooling and lubrication condition strongly influences tool life and the tool wear mechanism, and furthermore, that tool lubrication rather than cooling should be the purpose for using cutting fluid in this kind of operation, in order to avoid damage caused by tool temperature variations.
引用
收藏
页码：756 / 764
页数：9
相关论文
共 50 条
  • [1] Tool wear and tool life in end milling of 15–5 PH stainless steel under different cooling and lubrication conditions
    Aldo Braghini Junior
    Anselmo Eduardo Diniz
    Fernando Teixeira Filho
    [J]. The International Journal of Advanced Manufacturing Technology, 2009, 43 : 756 - 764
  • [2] Tool Wear and Formation Mechanism of White Layer When Hard Milling H13 Steel under Different Cooling/Lubrication Conditions
    Zhang, Song
    Li, Jianfeng
    Lv, Honggang
    [J]. ADVANCES IN MECHANICAL ENGINEERING, 2014,
  • [3] Method of Tool Wear Control during Stainless Steel End Milling
    Pyatykh, A. S.
    Savilov, A., V
    Timofeev, S. A.
    [J]. JOURNAL OF FRICTION AND WEAR, 2021, 42 (04) : 263 - 267
  • [4] Method of Tool Wear Control during Stainless Steel End Milling
    A. S. Pyatykh
    A. V. Savilov
    S. A. Timofeev
    [J]. Journal of Friction and Wear, 2021, 42 : 263 - 267
  • [5] Microstructure and mechanical properties of 15-5 PH stainless steel under different aging temperature
    Jin, Chunhui
    Zhou, Honglin
    Lai, Yuan
    Li, Bei
    Zhang, Kewei
    Chen, Huiqin
    Zhao, Jinhua
    [J]. METALLURGICAL RESEARCH & TECHNOLOGY, 2021, 118 (06)
  • [6] Hot deformation of 15-5 PH stainless steel
    Aghaie-Khafri, M.
    Adhami, F.
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2010, 527 (4-5): : 1052 - 1057
  • [7] Tool life and cutting forces in end milling Inconel 718 under dry and minimum quantity cooling lubrication cutting conditions
    Zhang, S.
    Li, J. F.
    Wang, Y. W.
    [J]. JOURNAL OF CLEANER PRODUCTION, 2012, 32 : 81 - 87
  • [8] Milling force and tool wear mechanisms on milling TC21 titanium alloy under different lubrication conditions
    Wang, Zhenyu
    Liang, Yingdong
    Li, Hongyu
    Yu, Tianbiao
    [J]. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2022, 123 (1-2): : 169 - 185
  • [9] Milling force and tool wear mechanisms on milling TC21 titanium alloy under different lubrication conditions
    Zhenyu Wang
    Yingdong Liang
    Hongyu Li
    Tianbiao Yu
    [J]. The International Journal of Advanced Manufacturing Technology, 2022, 123 : 169 - 185
  • [10] Tool wear damage caused by abundant emulsion in milling operation of PH stainless steel
    Diniz, Anselmo Eduardo
    Braghini Junior, Aldo
    Teixeira Filho, Fernando
    [J]. JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING, 2008, 30 (02) : 133 - 138
12345