Microstructure and mechanical properties of MgO-doped Al2TiO5 prepared by reactive sintering

被引：13

作者：

Maki, Ryosuke ^{[1
]}

Suzuki, Yoshikazu ^{[1
,2
]}

机构：

[1] Univ Tsukuba, Grad Sch Pure & Appl Sci, Tsukuba, Ibaraki 3058573, Japan

[2] Univ Tsukuba, Fac Pure & Appl Sci, Tsukuba, Ibaraki 3058573, Japan

来源：

JOURNAL OF THE CERAMIC SOCIETY OF JAPAN | 2013年 / 121卷 / 1415期

关键词：

Al2TiO5; MgO; MgAl2O4; Fracture strength; ALUMINUM TITANATE CERAMICS; AL2TIO5-MGTI2O5; SOLID-SOLUTIONS; THERMAL-EXPANSION BEHAVIOR; UNIFORMLY POROUS MGTI2O5; COMPOSITES; ADDITIVES; TEMPERATURE; STRENGTH; TIALITE;

D O I：

10.2109/jcersj2.121.568

中图分类号：

TQ174 [陶瓷工业]; TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

MgO-doped Al2TiO5 ceramics were reactively sintered from commercial alpha-Al2O3, TiO2 anatase and MgCO3 (basic) powders. Powder mixtures with molar ratio of Al2O3:TiO2:MgO = 1:1:0, 1:0.95:0.05, 1:0.90:0.10, and 1:0.85:0.15 were prepared by wet ball-milling with ZrO2 media. The green pellets were sintered at 1300-1500 C for 2 h in air to obtain dense samples. With changing the MgO doping amount, Al2TiO5/Al2O3, Al2TiO5/MgAl2O4/Al2O3, Al2TiO5/MgAl2O4 composites were synthesized. MgO doping was effective to reduce the Al2TiO5 matrix grain size and to reduce the strong anisotropy of Al2TiO5, which resulted in fewer microcracks. The maximum strength of samples sintered at 1400 and 1500 degrees C were 106 and 32MPa (15 mol% MgO), respectively. (C)2013 The Ceramic Society of Japan. All rights reserved.

引用

页码：568 / 571

页数：4

共 50 条

[1] Reactive sintering and microstructure of uniform, openly porous Al2TiO5
Hono, Taiki
Inoue, Naoya
Morimoto, Masafumi
Suzuki, Yoshikazu
[J]. JOURNAL OF ASIAN CERAMIC SOCIETIES, 2013, 1 (02): : 178 - 183
[2] Preparation, microstructure and properties of MgO modified Al2TiO5 porous ceramics
Kong, Fanlei
Chen, Xiujuan
Ren, Zhiheng
Wu, Zelin
Wang, Enge
Zhao, Guorui
[J]. JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2024, 31 : 2296 - 2305
[3] Sintering and mechanical properties of MgO-doped nanocrystalline hydroxyapatite
Tan, C. Y.
Yaghoubi, A.
Ramesh, S.
Adzila, S.
Purbolaksono, J.
Hassan, M. A.
Kutty, M. G.
[J]. CERAMICS INTERNATIONAL, 2013, 39 (08) : 8979 - 8983
[4] Mechanical properties of Al2TiO5 ceramics
Chen, Chun-Hong
Awaji, Hideo
[J]. HIGH-PERFORMANCE CERAMICS IV, PTS 1-3, 2007, 336-338 : 1417 - 1419
[5] Microstructure, Mechanical and Thermal Properties of ZTA/Al2TiO5 Ceramic Composites
Hassan, A. M.
Elsayed, Hamada
Awaad, M.
Saleh, A. M.
Naga, S. M.
[J]. CERAMICS-SWITZERLAND, 2023, 6 (04): : 1977 - 1990
[6] Effects of AlN on the reactive sintering of porous Al2TiO5 composites
Kitiwan, Mettaya
Kongsak, Mongkol
Atong, Duangduen
Wakui, Yoshito
[J]. MATERIALS TODAY-PROCEEDINGS, 2020, 33 : 1741 - 1745
[7] The effect of talc on the reaction sintering, microstructure and physical properties of Al2TiO5 based ceramics
Naderi, Golsa
Rezaie, Hamid Reza
ShokuhFar, Ali
Naghizadeh, Rahim
Atashgar, S.
[J]. JOURNAL OF CERAMIC PROCESSING RESEARCH, 2009, 10 (01): : 16 - 20
[8] Effects of SiC on Phases, Microstructure and Mechanical Property of Porous Al2TiO5 Fabricated by Reaction Sintering
Cui Hong-Zhi
Li Shu-Hai
Cui De-Yun
[J]. JOURNAL OF INORGANIC MATERIALS, 2014, 29 (05) : 509 - 514
[9] The influence of ZrO2 on the microstructure and mechanical properties of Al2TiO5 flexible ceramics
Ma, Qian
Shan, Qingliang
Chen, Changrong
Xu, Qiankun
Wang, Yewei
Zhou, Yuqian
Shui, Anze
[J]. MATERIALS CHARACTERIZATION, 2022, 185
[10] Mechanical Properties and Fabrication of Nanostructured Al2TiO5 Compound by Pulsed Current Activated Sintering
Kang, Hyun-Su
Park, Hyun-Kuk
Doh, Jung-Mann
Yoon, Jin-Kook
Park, Bang-Ju
Shon, In-Jin
[J]. KOREAN JOURNAL OF METALS AND MATERIALS, 2012, 50 (11): : 817 - 822

← 1 2 3 4 5 →