Multiple-point geostatistical simulation of dykes: application at Sungun porphyry copper system, Iran

Variogram-based methods are not capable of capturing high (> 2) order statistics since the variogram measures the relationship between two points at a time only. Multiple-point geostatistics (MPS) has brought new insights into many geological modeling problems. The application of MPS methods has been well documented in realizing complex geological patterns. These methods have often been used in reservoir characterization since their advent in recent decades. The frequent non-linear behaviors of geologic continuity are not limited to reservoirs, but mineral deposits bear complicated formations in many cases. Relying on the power of MPS methods and considering the complexity of geological scenarios in mineral deposits, we have applied MPS in the modeling of mineral deposits. A training image (TI) is produced using geological data from upper horizons of a porphyry copper ore deposit which have been mined out during the previous mining operations. In this study, the SNESIM algorithm has been used. A number of realizations are produced using this multiple-point geostatistical method. Extensive validation steps are performed considering the TI as the reference model. These validations first show that the TI is representative for the domain under study and also illustrates some degrees of similarity between the TI and the realizations. Despite simplifications made to the problem, the application of MPS in mineral deposit modeling still faces many challenges.