On-board strain measurement of a cryogenic composite tank mounted on a reusable rocket using FBG sensors

This article presents the real-time strain measurement of a composite liquid hydrogen (LH2) tank using fiber Bragg grating (FBG) sensors. The tank was composed of carbon fiber reinforced plastic (CFRP), and an aluminum liner was fabricated by the filament winding method and mounted on a reusable rocket, This rocket (vertical takeoff and landing) is called a reusable rocket vehicle test (RVT) and was developed by the Institute of Space and Astronautical Science of the Japan Aerospace Exploration Agency (ISAS/JAXA). Considering the high operational pressure and the iterative use of the tank, its structural integrity must be guaranteed. Thus, the authors have attempted a real-time strain measurement of the composite LH2 tank using FBG sensors during rocket operations. First, the adhesive properties of the FBG sensors were investigated at cryogenic temperatures. As a result, UV-coated FBG sensors and polyurethane adhesives were adopted. An onboard FBG demodulator was then developed to be mounted on the rocket and its performance was assessed. Finally, the strain measurement was attempted during the flight experiments of the RVT using the onboard FBG demodulator. FBG sensors were glued on the surface of the composite LH2 tank and connected to the onboard FBG demodulator. During these rocket operations, the output of the onboard FBG demodulator was continuously monitored via a telemetry system. The results obtained by the demodulator agreed well with those of the conventional foil strain gage.