Optimizing P3HT/PCBM/MWCNT films for increased stability in polymer bulk heterojunction solar cells

被引:26
|
作者
Singh, Vinamrita [1 ]
Arora, Swati [2 ]
Arora, Manoj [3 ]
Sharma, Vishal [1 ]
Tandon, R. P. [1 ]
机构
[1] Univ Delhi, Dept Phys & Astrophys, Delhi 110007, India
[2] Univ Delhi, Zakir Husain Delhi Coll, Dept Phys, Delhi 110002, India
[3] Univ Delhi, Dept Phys, Ramjas Coll, Delhi 110007, India
关键词
Multi-walled carbon nanotubes; Organic solar cells; Degradation; Mobility; Interfaces; Charge carrier recombination; CARBON NANOTUBES; P3HT PCBM; DEGRADATION; PERFORMANCE; ABSORPTION; MECHANISMS; MORPHOLOGY; TRANSPORT; COMPLEX; OXYGEN;
D O I
10.1016/j.physleta.2014.08.028
中图分类号
O4 [物理学];
学科分类号
0702 ;
摘要
The effect of multi-walled carbon nanotubes on the properties of P3HT:PCBM based solar cells has been studied. The concentration of MWCNT was optimized at 0.2% and the concentration of P3HT:PCBM was increased from 20 mg/ml to 30 mg/ml to obtain highest efficiency. An increase in charge carrier mobility was also observed, which is attributed to high charge transport properties of MWCNT. The active layer was optically stable with respect to absorption, whereas the emission spectra revealed an increase in charge recombination with time. The solar cells doped with MWCNT exhibited increased stability as compared to undoped cells. (C) 2014 Elsevier B.V. All rights reserved.
引用
收藏
页码:3046 / 3054
页数:9
相关论文
共 50 条
  • [1] Bulk and contact resistance in P3HT:PCBM heterojunction solar cells
    Shen, Yang
    Li, Kejia
    Majumdar, Nabanita
    Campbell, Joe C.
    Gupta, Mool C.
    [J]. SOLAR ENERGY MATERIALS AND SOLAR CELLS, 2011, 95 (08) : 2314 - 2317
  • [2] Nanostructured morphology of P3HT:PCBM bulk heterojunction solar cells
    Kalita, Golap
    Masahiro, Matsushima
    Koichi, Wakita
    Umeno, Masayoshi
    [J]. SOLID-STATE ELECTRONICS, 2010, 54 (04) : 447 - 451
  • [3] Stability of Bulk Heterojunction Organic Solar Cells with Different Blend Ratios of P3HT: PCBM
    Kwon, Moo Hyun
    [J]. TRANSACTIONS ON ELECTRICAL AND ELECTRONIC MATERIALS, 2012, 13 (02) : 98 - 101
  • [4] Electrodes for GaOHPc:PCBM/P3HT:PCBM bulk heterojunction solar cell
    Kaulachs, I.
    Muzikante, I.
    Gerca, L.
    Shlihta, G.
    Shipkovs, P.
    Grehovs, V.
    Kalnachs, J.
    Roze, M.
    Rozite, G.
    Ivanova, A.
    [J]. CHEMICAL PHYSICS, 2012, 405 : 46 - 51
  • [5] Transparent back contacts for P3HT:PCBM bulk heterojunction solar cells
    Sendova-Vassileva, M.
    Dikov, H.
    Popkirov, G.
    Lazarova, E.
    Gancheva, V.
    Grancharov, G.
    Tsocheva, D.
    Mokreva, P.
    Vitanov, P.
    [J]. 18TH INTERNATIONAL SUMMER SCHOOL ON VACUUM, ELECTRON AND ION TECHNOLOGIES (VEIT2013), 2014, 514
  • [6] Surface engineering of polymer interfaces in bulk heterojunction P3HT/PCBM photovoltaic cells
    Andrew, Trisha L.
    Bulovic, Vladimir
    [J]. ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY, 2011, 242
  • [7] Effect of Trace Solvent on the Morphology of P3HT:PCBM Bulk Heterojunction Solar Cells
    Chang, Lilian
    Lademann, Hans W. A.
    Bonekamp, Joerg-Bernd
    Meerholz, Klaus
    Moule, Adam J.
    [J]. ADVANCED FUNCTIONAL MATERIALS, 2011, 21 (10) : 1779 - 1787
  • [8] An Experimental Insight into the Reasons for Deterioration of P3HT:PCBM Bulk Heterojunction Solar Cells
    Mounika T.
    Belagali S.L.
    Singh I.
    Kumar K.
    Arun P.
    [J]. Applied Solar Energy, 2023, 59 (4) : 410 - 415
  • [9] Effect of polydispersity on the bulk-heterojunction morphology of P3HT:PCBM solar cells
    Munshi, Joydeep
    Ghumman, Umar Farooq
    Iyer, Akshay
    Dulal, Rabindra
    Chen, Wei
    Chien, TeYu
    Balasubramanian, Ganesh
    [J]. JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS, 2019, 57 (14) : 895 - 903
  • [10] FABRICATION OF P3HT/PCBM BULK HETEROJUNCTION SOLAR CELLS WITH DNA COMPLEX LAYER
    Kolachure, Vidyalakshmi
    Jin, Michael H-C.
    [J]. PVSC: 2008 33RD IEEE PHOTOVOLTAIC SPECIALISTS CONFERENCE, VOLS 1-4, 2008, : 1244 - 1248