Cutting of aramide fiber-reinforced plastics by CO2 laser

被引：4

作者：

Nasedkin, YV ^{[1
]}

Tsarev, VF

Zelenina, IV

机构：

[1] State Res Ctr Russia, Obninsk Res & Prod Enterprise Technologiya, Obninsk, Russia

[2] All Russian Inst Aviat Mat, Moscow, Russia

来源：

MECHANICS OF COMPOSITE MATERIALS | 1999年 / 35卷 / 03期

关键词：

aramide plastics; laser; cutting; edge; strength; moisture absorption; fiber; binder;

D O I：

10.1007/BF02257258

中图分类号：

O3 [力学];

学科分类号：

08 ; 0801 ;

摘要：

Comparative characteristics of aramide fiber reinforced plastics (AFRP) made by laser cutting or machining are presented. It is found that the strength of the specimens cut out by laser is 4-25% higher, while the moisture absorption is at least 2 times lower as compared to those cut out by machining. The deviation of the cutting edge size for AFRP 2 mm thick does not exceed 0.4 mm. Calculated and experimental data are given. The possibilities and conditions of cutting the AFRP up to 6 mm thick are determined.

引用

页码：259 / 264

页数：6

共 50 条

[1] Cutting of aramide fiber-reinforced plastics by Co2 laser
Yu. V. Nasedkin
V. F. Tsarev
I. V. Zelenina
[J]. Mechanics of Composite Materials, 1999, 35 : 259 - 264
[2] ORGANIC EMISSIONS DURING LASER CUTTING OF FIBER-REINFORCED PLASTICS
LEVSEN, K
EMMRICH, M
KOCK, H
PRIESS, B
SOLLINGER, S
TRASSER, FJ
[J]. STAUB REINHALTUNG DER LUFT, 1991, 51 (10): : 365 - 372
[3] Experimental study on the picosecond pulsed laser cutting of carbon fiber-reinforced plastics
Hu, Jun
Zhu, Dezhi
[J]. JOURNAL OF REINFORCED PLASTICS AND COMPOSITES, 2018, 37 (15) : 993 - 1003
[4] CW CO2 laser cutting of plastics
Atanasov, PA
Baeva, MG
[J]. XI INTERNATIONAL SYMPOSIUM ON GAS FLOW AND CHEMICAL LASERS AND HIGH-POWER LASER CONFERENCE, 1997, 3092 : 772 - 775
[5] Investigation of stresses in the orthogonal cutting of fiber-reinforced plastics
Wern, CW
Ramulu, M
Shukla, A
[J]. EXPERIMENTAL MECHANICS, 1996, 36 (01) : 33 - 41
[6] LASER CUTTING OF FIBER-REINFORCED POLYESTERS
TAGLIAFERRI, V
DIILIO, A
VISCONTI, IC
[J]. COMPOSITES, 1985, 16 (04): : 317 - 325
[7] FIBER-REINFORCED PLASTICS
SCHARR, G
[J]. KUNSTSTOFFE-GERMAN PLASTICS, 1992, 82 (12): : 1307 - 1309
[8] Improving laser cutting quality of carbon fiber-reinforced plastics by improving laser beam pointing stability
Fan, Jinwei
Ren, Xingfei
Pan, Ri
Chen, Dongju
Sun, Kun
[J]. OPTICAL ENGINEERING, 2022, 61 (12)
[9] Numerical simulation of water jet-guided laser cutting of carbon fiber-reinforced plastics
Sun, Dong
Han, Fuzhu
Ying, Weisheng
[J]. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2019, 233 (10) : 2023 - 2032
[10] Chip formation model of cutting fiber-reinforced plastics perpendicular to fiber axis
Pwu, HY
Hocheng, H
[J]. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, 1998, 120 (01): : 192 - 196

← 1 2 3 4 5 →