The Radome Detection Machine Tool Geometric Error Modeling and Measurement

被引：0
|
作者：
Wang, Hong [1 ]
Pan, Fangyu [2 ]
Pan, Chengqun [3 ]
机构：
[1] East China Normal Univ, Coll Presch & Special Educ, Key Lab Speech & Hearing Sci, Minist Educ, Shanghai, Peoples R China
[2] Shanghai Univ, CIMS & Robot Ctr, Shanghai, Peoples R China
[3] Jian Min Tools CO Ltd, Jian, Jiangsu, Peoples R China
来源：
MACHINE DESIGN AND MANUFACTURING ENGINEERING II, PTS 1 AND 2 | 2013年 / 365-366卷
关键词：
geometric error; error model; laser interferometer; machine tool; measurement;
D O I：
10.4028/www.scientific.net/AMM.365-366.697
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Antenna is an important and valuable component in industry. In order to protect it, the radome is adopted. As the non-uniform thickness of radome affects the performance of the antenna, in order to maintain the performance of antenna, it is necessary to have a dedicated device to detect the radome, thus the detection machine tool is used. The accuracy is the key point of the detection machine tool, so in this paper, its error model and measurement are presented. By the pitch compensation, the accuracy is enhanced, which achieves the desired value.
引用
收藏
页码：697 / +
页数：2
相关论文
共 50 条
  • [1] A Review of Geometric Error Modeling and Error Detection for CNC Machine Tool
    Han, Zhenyu
    Jin, Hongyu
    Liu, Yulong
    Fu, Hongya
    [J]. SENSORS, MEASUREMENT AND INTELLIGENT MATERIALS, PTS 1-4, 2013, 303-306 : 627 - 631
  • [2] 4-Axis Machine Tool Geometric Error Modeling And Measurement
    Pan, Fagyu
    Li, Ming
    Xu, Changkai
    [J]. MECHANICAL ENGINEERING AND MATERIALS, PTS 1-3, 2012, 152-154 : 788 - 795
  • [3] Modeling of Mapping Relationship Between Machining Error and Geometric Error of Machine Tool
    Li, Shihao
    Zhang, Jun
    Tang, Yuyang
    Yin, Jia
    Zhao, Wanhua
    [J]. Hsi-An Chiao Tung Ta Hsueh/Journal of Xi'an Jiaotong University, 2021, 55 (10): : 50 - 59
  • [4] Accuracy improvement of miniaturized machine tool: Geometric error modeling and compensation
    Lee, Jae Ha
    Liu, Yu
    Yang, Seung-Han
    [J]. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2006, 46 (12-13): : 1508 - 1516
  • [5] Measurement of geometric error of machine tool guideway system based on laser tracker
    Zhang, Zhenjiu
    Hu, Hong
    Liu, Xin
    [J]. Zhongguo Jiguang/Chinese Journal of Lasers, 2011, 38 (09):
  • [6] Geometric error modeling and sensitivity analysis of a five-axis machine tool
    Li, Jie
    Xie, Fugui
    Liu, Xin-Jun
    [J]. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2016, 82 (9-12): : 2037 - 2051
  • [7] Geometric error modeling and sensitivity analysis of a five-axis machine tool
    Jie Li
    Fugui Xie
    Xin-Jun Liu
    [J]. The International Journal of Advanced Manufacturing Technology, 2016, 82 : 2037 - 2051
  • [8] Reconfigurable data driven virtual machine tool: Geometric error modeling and evaluation
    Fesperman, Ronnie R.
    Moylan, Shawn P.
    Vogl, Gregory W.
    Donmez, M. Alkan
    [J]. CIRP JOURNAL OF MANUFACTURING SCIENCE AND TECHNOLOGY, 2015, 10 : 120 - 130
  • [9] A new approach to geometric error modeling and compensation for a three-axis machine tool
    Baohai Wu
    Yanjun Yin
    Ying Zhang
    Ming Luo
    [J]. The International Journal of Advanced Manufacturing Technology, 2019, 102 : 1249 - 1256
  • [10] A new approach to geometric error modeling and compensation for a three-axis machine tool
    Wu, Baohai
    Yin, Yanjun
    Zhang, Ying
    Luo, Ming
    [J]. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2019, 102 (5-8): : 1249 - 1256
12345