Analysis of chaotic instabilities in boiling systems

An analytic model for the investigation of non-linear dynamics in boiling systems has been developed. This model is comprised of a nodal formulation that uses one-dimensional homogeneous equilibrium assumptions for diabatic two-phase flow, a lumped parameter approach for heated wall dynamics, and point neutron kinetics for the consideration of nuclear feedback in a boiling water reactor (BWR) loop. This model indicates that a boiling channel coupled with a riser may experience chaotic oscillations. In contrast, a boiling channel without a riser that is subjected to a constant pressure drop (i.e. a parallel channel) may undergo a supercritical bifurcation (i.e. may experience a limit cycle), but chaos was not found. Flow instabilities in a two-phase natural circulation loop have been verified using the model presented in this paper. The predictions of the effects of the channel inlet resistance, outlet resistance and liquid level in the downcomer agree with the data of Kyung and Lee. Finally, an analysis of nuclear-coupled density-wave instabilities in a simplified BWR (SBWR) was performed. Significantly, even for low pressure conditions, a simplified SBWR appears to be stable during start-up and normal operations; however, a limit cycle may occur for abnormal operating conditions. (C) 1997 Elsevier Science S.A.