Fatigue analysis of butt welded AH36 steel joints: Thermographic Method and design S-N curve

被引：77
|
作者：
Crupi, V. [1 ]
Guglielmino, E. [1 ]
Maestro, M. [2 ]
Marino, A. [2 ]
机构：
[1] Univ Messina, Dept Ind Chem & Mat Engn, I-98166 Messina, Italy
[2] Univ Trieste, Dept Naval Architecture Ocean & Environm Engn, Trieste, Italy
来源：
MARINE STRUCTURES | 2009年 / 22卷 / 03期
关键词：
Ship design; Welded joints; Thermographic Method; Fatigue strength prediction; Design codes;
D O I：
10.1016/j.marstruc.2009.03.001
中图分类号：
U6 [水路运输]; P75 [海洋工程];
学科分类号：
0814 ; 081505 ; 0824 ; 082401 ;
摘要：
The traditional methods of fatigue assessment of welded joints have some limitations, and are extremely time consuming. In order to overcome these difficulties, the Thermographic Method (TM), based on thermographic analyses, has been applied to predict the fatigue behaviour of butt welded joints, made of AH36 steel, largely used in shipbuilding. Experimental tests have been carried out to assess the fatigue capability in terms of S-N curves and fatigue limits. The predictions of the fatigue capability obtained resorting to the Thermographic Method show a good agreement with those derived from the traditional procedure. Moreover, the fatigue design recommendations were compared to the experimental data in order to analyse the reliability of the codes. (C) 2009 Elsevier Ltd. All rights reserved.
引用
下载
收藏
页码：373 / 386
页数：14
相关论文
共 50 条
  • [1] Analysis of vibration fatigue S-N curve on Q235B steel butt welded joint
    Institute of Materials Science and Engineering, Inner Mongolia University of Technology, Hohhot
    010051, China
    不详
    010051, China
    Hanjie Xuebao, 8 (39-42):
  • [2] Identification of efficient material S-N curve for steel welded joints
    Blacha, Lukasz
    Karolczuk, Aleksander
    FATIGUE FAILURE AND FRACTURE MECHANICS, 2012, 726 : 118 - 124
  • [3] Rapid Determination of the S-N Curve for Steel by means of the Thermographic Method
    Lipski, Adam
    ADVANCES IN MATERIALS SCIENCE AND ENGINEERING, 2016, 2016
  • [4] Master S-N curve method for fatigue evaluation of welded components
    Dong, P.
    Hong, J.K.
    Osage, D.A.
    Prager, M.
    Welding Research Council Bulletin, 2002, (474): : 1 - 44
  • [5] Proposal for a more accurate physically based S-N curve for welded steel joints
    Lassen, Tom
    Recho, Naman
    INTERNATIONAL JOURNAL OF FATIGUE, 2009, 31 (01) : 70 - 78
  • [6] Study of the effect of toe grinding on fatigue response of cruciform welded joints of ASTM A131 grade AH36 steel
    Funes, Gabriel Xavier
    Bianchi, Kleber Eduardo
    Amaro, Priscila Machado
    MATERIA-RIO DE JANEIRO, 2018, 23 (01):
  • [7] Influence of Weld-Porosity Defects on Fatigue Strength of AH36 Butt Joints Used in Ship Structures
    Crupi, Vincenzo
    Epasto, Gabriella
    Guglielmino, Eugenio
    Marino, Alberto
    METALS, 2021, 11 (03) : 1 - 18
  • [8] Research on S-N Curve Method in Fatigue Analysis of SWATH
    Xu, Zhiting
    Wang, Xiaoyu
    Ship Building of China, 2017, 58 (02) : 38 - 45
  • [9] Investigation of the Self-Heating of Q460 Butt Joints and an S-N Curve Modeling Method Based on Infrared Thermographic Data for High-Cycle Fatigue
    Wei, Wei
    Li, Cheng
    Sun, Yibo
    Xu, Hongji
    Yang, Xinhua
    METALS, 2021, 11 (02) : 1 - 23
  • [10] Determination of the S-N Curve and the Fatigue Limit by Means of the Thermographic Method for Ductile Cast Iron
    Lipski, Adam
    FATIGUE FAILURE AND FRACTURE MECHANICS XXVII, 2018, 2028
12345