Representation of surface roughness in fused deposition modeling

被引：296

作者：

Ahn, Daekeon ^{[1
]}

Kweon, Jin-Hwe ^{[1
]}

Kwon, Soonman ^{[2
]}

Song, Jungil ^{[2
]}

Lee, Seokhee ^{[3
]}

机构：

[1] Gyeongsang Natl Univ, Res Ctr Aircraft Parts Technol, Jinju 660701, South Korea

[2] Changwon Natl Univ, Sch Mechatron, Chang Won 641773, South Korea

[3] Pusan Natl Univ, Dept Mech Engn, Pusan 609735, South Korea

来源：

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY | 2009年 / 209卷 / 15-16期

基金：

新加坡国家研究基金会;

关键词：

Fused deposition modeling; Surface roughness; PARTS;

D O I：

10.1016/j.jmatprotec.2009.05.016

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Most rapid prototyping (RP) technologies apply a layered manufacturing (LM) process to efficiently fabricate 3D physical models. However, a critical drawback that reduces the Surface quality of the RP parts occurs by utilizing LM. Hence, topics related to surface roughness have been a key issue in RP In this paper, a new approach to model surface roughness in fused deposition modeling (FDM) is proposed. Based on actual surface roughness distributions of FDM parts, a theoretical model to express surface roughness distribution according to changes in surface angle is presented by considering the main factors that crucially affect surface quality. The proposed expression is verified by implementation and comparison with empirical data. Also, the effectiveness of the main factors is analyzed and discussed. (C) 2009 Elsevier B.V. All rights reserved.

引用

页码：5593 / 5600

页数：8

共 50 条

[1] Prediction model of surface roughness of fused deposition modeling parts
Hu W.
Liao W.
Liu T.
Xiao X.
Gu M.
Li S.
[J]. Zhongnan Daxue Xuebao (Ziran Kexue Ban)/Journal of Central South University (Science and Technology), 2020, 51 (09): : 2460 - 2470
[2] Modeling and analysis of surface roughness in fused deposition modeling based on infill patterns
Patil, Pooja
Raykar, Sunil J.
Bhamu, Jaiprakash
Singh, Dharmendra
[J]. INDIAN JOURNAL OF ENGINEERING AND MATERIALS SCIENCES, 2022, 29 (01) : 92 - 99
[3] Relation between surface roughness and overlap interval in Fused Deposition Modeling
Ahn, Daekeon
Kweon, Jin-Hwe
Choi, Jin-Ho
Lee, Seok-Hee
[J]. ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES II, PTS 1 AND 2, 2011, 264-265 : 1625 - +
[4] Surface Roughness of Fused Deposition Modeling Based on Micro-Extrusion: A Review
Xiao J.
Gao Y.
Chen S.
Zhou Y.
Zhong W.
[J]. Xiao, Jianhua (xjh3500021002@163.com), 1600, Sichuan University (33): : 160 - 167
[5] Influence of Print Orientation on Surface Roughness in Fused Deposition Modeling (FDM) Processes
Buj-Corral, Irene
Dominguez-Fernandez, Alejandro
Duran-Llucia, Ramon
[J]. MATERIALS, 2019, 12 (23)
[6] Decision Tree Methods for Predicting Surface Roughness in Fused Deposition Modeling Parts
Barrios, Juan M.
Romero, Pablo E.
[J]. MATERIALS, 2019, 12 (16)
[7] A Study of Build Edge Profile for Prediction of Surface Roughness in Fused Deposition Modeling
Taufik, Mohammad
Jain, Prashant K.
[J]. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, 2016, 138 (06):
[8] APPLICATION OF TAGUCHI METHOD TO OPTIMIZE FUSED DEPOSITION MODELING PROCESS PARAMETERS FOR SURFACE ROUGHNESS
Maidin, Shajahan
Fadani, Irdawati
Hayati, Norilani Md. Nor
Albaluooshi, Haroun
[J]. JURNAL TEKNOLOGI-SCIENCES & ENGINEERING, 2022, 84 (06): : 29 - 37
[9] Polishing of fused deposition modeling products by hot air jet: Evaluation of surface roughness
Adel, Mohamed
Abdelaal, Osama
Gad, Abdelrasoul
Nasr, Abu Balu
Khalil, AboelMakaram
[J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2018, 251 : 73 - 82
[10] Investigating the surface roughness of implant prepared by combining fused deposition modeling and investment casting
Singh, Rupinder
Singh, Sunpreet
Kapoor, Prince
[J]. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING, 2016, 230 (05) : 403 - 410

← 1 2 3 4 5 →