Fabrication and Characterization of SnCl2- and CuBr-Added Perovskite Photovoltaic Devices

被引：5

作者：

Asakawa, Yugo ^{[1
]}

Oku, Takeo ^{[1
]}

Kido, Masashi ^{[1
]}

Suzuki, Atsushi ^{[1
]}

Okumura, Riku ^{[1
]}

Okita, Masanobu ^{[2
]}

Fukunishi, Sakiko ^{[2
]}

Tachikawa, Tomoharu ^{[2
]}

Hasegawa, Tomoya ^{[2
]}

机构：

[1] Univ Shiga Prefecture, Dept Mat Sci, 2500 Hassaka, Hikone, Shiga 5228533, Japan

[2] Osaka Gas Chem Co Ltd, Konohana Ku, 5-11-61 Torishima, Osaka, Osaka 5540051, Japan

来源：

TECHNOLOGIES | 2022年 / 10卷 / 06期

基金：

日本学术振兴会;

关键词：

perovskite; solar cell; copper; tin; first-principles calculation; polysilane; SOLAR-CELLS; LEAD-HALIDE; HIGHLY EFFICIENT; FORMAMIDINIUM; CH3NH3PBI3; PERFORMANCE;

D O I：

10.3390/technologies10060112

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Perovskite photovoltaic devices added with tin (Sn) dichloride and copper (Cu) bromide were fabricated and characterized. The thin film devices were prepared by an ordinary spin-coating technique using an air blowing method in ambient air. A decaphenylcyclopentasilane layer was coated at the surface of perovskite layer and annealed at a high temperature of 190 degrees C. Conversion efficiencies and short-circuit current densities were improved for devices added with Sn and Cu compared with the standard devices. The energy gap of the perovskite crystal decreased through the Sn addition, which was also confirmed by first-principles calculations.

引用

页数：12

共 50 条

[1] Fabrication and Characterization of Perovskite Photovoltaic Devices with TiO2 Nanoparticle Layers
Oku, Takeo
Ueoka, Naoki
Suzuki, Kohei
Suzuki, Atsushi
Yamada, Masahiro
Sakamoto, Hiroki
Minami, Satoshi
Fukunishi, Sakiko
Kohno, Kazufumi
Miyauchi, Shinsuke
IRAGO CONFERENCE 2016: 360 DEGREE OUTLOOK ON CRITICAL SCIENTIFIC AND TECHNOLOGICAL CHALLENGES FOR A SUSTAINABLE SOCIETY, 2017, 1807
[2] Fabrication and characterization of photovoltaic devices based on perovskite compounds with TiO2 nanoparticles
Kanayama, Masato
Oku, Takeo
Suzuki, Atsushi
Yamada, Masahiro
Fukunishi, Sakiko
Kohno, Kazufumi
Sakamoto, Hiroki
IRAGO CONFERENCE 2014, 2015, 1649 : 84 - 88
[3] Fabrication and characterization of bismuth ferrite as an electron transport layer in perovskite photovoltaic devices
Shirahata, Yasuhiro
Suzuki, Atsushi
Oku, Takeo
JOURNAL OF THE CERAMIC SOCIETY OF JAPAN, 2016, 124 (05) : 602 - 605
[4] Hybrid Perovskite Photovoltaic Devices: Properties, Architecture, and Fabrication Methods
Al-Dainy, Gailan A.
Bourdo, Shawn E.
Saini, Viney
Berry, Brian C.
Biris, Alexandru S.
ENERGY TECHNOLOGY, 2017, 5 (03) : 373 - 401
[5] Materials and methods for cost-effective fabrication of perovskite photovoltaic devices
Zhang, Chunyang
Park, Nam-Gyu
COMMUNICATIONS MATERIALS, 2024, 5 (01)
[6] Effects of CuBr addition to CH3NH3PbI3(CI) Perovskite Photovoltaic Devices
Oku, Takeo
Ohishi, Yuya
Tanaka, Hiroki
IRAGO CONFERENCE 2017: A 360-DEGREE OUTLOOK ON CRITICAL SCIENTIFIC AND TECHNOLOGICAL CHALLENGES FOR A SUSTAINABLE SOCIETY, 2018, 1929
[7] FABRICATION AND CHARACTERIZATION OF 2.3eV INGAN PHOTOVOLTAIC DEVICES
Misra, P.
Boney, C.
Medelci, N.
Starikov, D.
Freundlich, A.
Bensaoula, A.
PVSC: 2008 33RD IEEE PHOTOVOLTAIC SPECIALISTS CONFERENCE, VOLS 1-4, 2008, : 1380 - +
[8] Fabrication and characterization of inkjet-printed 2D perovskite optoelectronic devices
Min, Misook
Hossain, Ridwan F.
Ma, Liang-Chieh
Kaul, Anupama B.
JOURNAL OF VACUUM SCIENCE & TECHNOLOGY A, 2020, 38 (05):
[9] Fabrication and characterization of potassium- and formamidinium-added perovskite solar cells
Kandori, Satsuki
Oku, Takeo
Nishi, Kousuke
Kishimoto, Taku
Ueoka, Naoki
Suzuki, Atsushi
JOURNAL OF THE CERAMIC SOCIETY OF JAPAN, 2020, 128 (10) : 805 - 811
[10] Fabrication and Characterization of Perovskite Solar Cells added with Zinc Phthalocyanine to Active Layer
Suzuki, Atsushi
Hayashi, Yuto
Yamasaki, Yasuhiro
Oku, Takeo
IRAGO CONFERENCE 2018: A 360-DEGREE OUTLOOK ON CRITICAL SCIENTIFIC AND TECHNOLOGICAL CHALLENGES FOR A SUSTAINABLE SOCIETY, 2019, 2067

← 1 2 3 4 5 →