Development of a Dynamic Hydrogen Electrode coupled to Proton Exchange Membrane Fuel Cell

被引：0

作者：

Guzman, C. ^{[3
]}

Alvarez, A. ^{[4
]}

Rivas, S. ^{[2
]}

Duron-Torres, S. M. ^{[3
]}

Chavez-Ramirez, A. U. ^{[1
]}

Ledesma-Garcia, J. ^{[2
]}

Arriaga, L. G. ^{[1
]}

机构：

[1] Ctr Invest & Desarrollo Tecnol Electroquim SC, Queretaro 76703, Mexico

[2] Univ Autonoma Queretaro, Fac Ingn, Div Invest & Posgrad, Queretaro 76010, Mexico

[3] UACQ UAZ, La Escondida Zacatecas 96160, Zac, Mexico

[4] Univ Tecnol Corregidora, Div Acad, Queretaro 76900, Mexico

来源：

INTERNATIONAL JOURNAL OF ELECTROCHEMICAL SCIENCE | 2013年 / 8卷 / 06期

关键词：

Dynamic Hydrogen Electrode; Proton Exchange Fuel Cell; High Temperature; Composite membrane; COMPOSITE MEMBRANES; HIGH-TEMPERATURE; BIPOLAR PLATE; WATER TRANSPORT; PEMFC; PERFORMANCE; VISUALIZATION; DEGRADATION; OPERATION; CORROSION;

D O I：

暂无

中图分类号：

O646 [电化学、电解、磁化学];

学科分类号：

081704 ;

摘要：

This work reports the results of using a Dynamic Hydrogen Electrode (DHE) as a reference electrode for performance measurements in an Proton Exchange Membrane Fuel Cell (PEMFC) operated at high temperature conditions and low relative humidity (T = 120 degrees C y HR = 23 %). The performance of PEMFC was measured by using a composite membrane (SBA-16) and the results compared to those obtained with a commercial Nafion-115 membrane. The reference electrode was made using a platinum black deposit on the platinum wire surface. The DHE was introduced in the PEMFC close to the cathode electrode and it was stable under fuel cell operation. The kinetic parameters of anode and cathode reactions were estimated in a separated way.

引用

页码：8893 / 8904

页数：12

共 50 条

[1] Gradient Membrane Electrode of Proton Exchange Membrane Fuel Cell
Zheng J.
Dai N.
Wang Q.
Zhu S.
Zheng J.
Tongji Daxue Xuebao/Journal of Tongji University, 2018, 46 : 228 - 236
[2] Oxygen electrode for proton exchange membrane fuel cell
Lu, L.H.
Jin, L.H.
Wang, J.T.
Dianyuan Jishu/Chinese Journal of Power Sources, 2001, 25 (02):
[3] Ordered Membrane Electrode Assembly of Proton Exchange Membrane Fuel Cell
Liu Feng
Wang Cheng
Zhang Jianbo
Lan Aidong
Li Jianqiu
Ouyang Minggao
PROGRESS IN CHEMISTRY, 2014, 26 (11) : 1763 - 1771
[4] Optimization of a proton exchange membrane fuel cell membrane electrode assembly
Marc Secanell
Ron Songprakorp
Ned Djilali
Afzal Suleman
Structural and Multidisciplinary Optimization, 2010, 40 : 563 - 583
[5] Optimization of a proton exchange membrane fuel cell membrane electrode assembly
Secanell, Marc
Songprakorp, Ron
Djilali, Ned
Suleman, Afzal
STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION, 2010, 40 (1-6) : 563 - 583
[6] Electrostatic spraying of membrane electrode for proton exchange membrane fuel cell
Liu, Ruiliang
Zhou, Wei
Wan, Liyang
Zhang, Pengyang
Li, Shuangli
Gao, Yu
Xu, Dongsheng
Zheng, Congcong
Shang, Mingfeng
CURRENT APPLIED PHYSICS, 2020, 20 (01) : 11 - 17
[7] DEVELOPMENT OF A SIEVE PRINTING PROCESS FOR THE PRODUCTION OF MEMBRANE ELECTRODE ASSEMBLY FOR PROTON EXCHANGE MEMBRANE FUEL CELL
Bonifacio, Rafael Nogueira
Linardi, Marcelo
Cuenca, Ricardo
QUIMICA NOVA, 2011, 34 (01): : 96 - 100
[8] Analysis and modeling of a membrane electrode assembly in a proton exchange membrane fuel cell
Orhan, Mehmet F.
Saka, Kenan
Kahraman, Huseyin
JOURNAL OF RENEWABLE AND SUSTAINABLE ENERGY, 2020, 12 (04)
[9] The development of a sodium borohydride hydrogen generation system for proton exchange membrane fuel cell
Li, Siou-Cheng
Wang, Fu-Cheng
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 2016, 41 (04) : 3038 - 3051
[10] Development and current status of hydrogen quality standards for proton exchange membrane fuel cell
Liu, Xiaomin
Zhang, Bangqiang
Ai, Bin
Yang, Yanmei
Wang, Juan
Yang, Haibo
Cai, Hong
Bao, Wei
Huagong Jinzhan/Chemical Industry and Engineering Progress, 2021, 40 (02): : 703 - 708

← 1 2 3 4 5 →