In situ SEM-EBSP observations of recrystallization texture formation in Al-3mass%Mg alloy

被引:2
|
作者
Kajihara, Katsura
Matsumoto, Kazuhide
Matsumoto, Katsushi
机构
[1] Kobe Steel Ltd, Mat Res Lab, Nishi Ku, Kobe, Hyogo 6512271, Japan
[2] Kobe Steel Ltd, Aluminum & Copper Div, Moka, Tochigi 3214367, Japan
关键词
in-situ SEM-EBSP; recrystallization; nucleation; grain growth; Al-Mg alloy;
D O I
10.4028/www.scientific.net/MSF.519-521.1579
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
This study presents in situ observations of recrystallization texture formation in Al-3mass%Mg using SEM concurrent with electron back scattering pattern (EBSP) with hot stage. In the present discussion, the emphasis is on the characteristics of the preferred growth or the shrinkage of Cube and other oriented grains. The in-situ observations of recrystallization demonstrate clearly that the nucleation, growth and shrinkage of recrystallized grains occur simultaneously in each orientation in each region. The overall development of recrystallization texture depends on the balance of nucleation/growth and shrinkage/disappearance of each orientation during recrystallization. The preferential growth is determined by the grain boundary mobility between recrystallized grains or the clusters composed of several similar oriented grains, i.e. Cube clusters or S clusters, and neighboring deformed matrix, and the competitive growth with the surrounding grains. On the other hand, the isolated oriented grain and the strain-stored grains tend to shrink and disappear during recrystallization and grain growth.
引用
收藏
页码:1579 / 1584
页数:6
相关论文
共 50 条
  • [1] Texture formation during high temperature compression deformation in Al-3mass%Mg alloy
    Okayasu, Kazuto
    Fukutomi, Hiroshi
    JOURNAL OF THE JAPAN INSTITUTE OF METALS, 2006, 70 (07) : 562 - 567
  • [2] In-situ EBSP observations of recrystallization in aluminum alloy sheets
    Kajihara, Katsura
    R and D: Research and Development Kobe Steel Engineering Reports, 2008, 58 (03): : 40 - 45
  • [3] Effect of grain boundary migration on texture formation in Al-3mass%Mg solid solution during high temperature deformation
    Okayasu, Kazuto
    Takekoshi, Hiroki
    Fukutomi, Hiroshi
    RECRYSTALLIZATION AND GRAIN GROWTH III, PTS 1 AND 2, 2007, 558-559 : 551 - +
  • [4] IN-SITU SEM/EBSP ANALYSIS DURING ANNEALING IN AL-MG ALLOYS
    Takayama, Yoshimasa
    Morita, Kazuhiro
    Kato, Hajime
    Ookubo, Yoshimasa
    APPLICATIONS OF TEXTURE ANALYSIS, 2009, 201 : 555 - +
  • [5] Shear texture and recrystallization texture formation in high speed hot rolling of Al-Mg alloy
    Sakai, T
    Lee, SH
    Yoneda, K
    Hamada, S
    Saito, Y
    RECRYSTALLIZATION AND GRAIN GROWTH, VOLS 1 AND 2, 2001, : 1255 - 1260
  • [6] Preferred orientation formation in Al-3mass% Mg subjected to shear deformation and subsequent annealing
    Takayama, Y.
    Kanemaru, T.
    Wachi, K.
    Watanabe, H.
    18TH INTERNATIONAL CONFERENCE ON TEXTURES OF MATERIALS (ICOTOM-18), 2018, 375
  • [7] Effect of recovery on the recrystallization texture of an Al-Mg alloy
    Liu, W. C.
    Li, J.
    Yuan, H.
    Yang, Q. X.
    SCRIPTA MATERIALIA, 2007, 57 (09) : 833 - 836
  • [8] Formation of (111) recrystallization texture in Al-Mg alloys
    Kamijo, T
    Iwasaki, Y
    Fukutomi, H
    GRAIN GROWTH IN POLYCRYSTALLINE MATERIALS II, PTS 1 AND 2, 1996, 204- : 371 - 378
  • [9] In-situ observations of static recrystallization and texture formation in a cold-rolled CoCrFeMnNi high entropy alloy
    Guo, Baoqi
    Ray, Ranjit K.
    Yoshida, Shuhei
    Bai, Yu
    Tsuji, Nobuhiro
    SCRIPTA MATERIALIA, 2022, 215
  • [10] Effects of Heating Methods on Recrystallization Texture of an Al-Mg-Si Alloy
    Gao, Qimei
    Liu, Yazhen
    Tian, Ni
    MATERIALS AND MANUFACTURING, PTS 1 AND 2, 2011, 299-300 : 131 - +