Characteristics and mechanisms of phosphate adsorption onto basic oxygen furnace slag

The adsorption characteristics of phosphate adsorption on the basic oxygen furnace (BOF) slag were identified as a function of pH and ion strengths in solution. In addition, adsorption mechanisms were investigated by conducting batch tests on both the hydrolysis and phosphate adsorption process of the BOF slag, and making a comparative analysis to gain newer insights into understanding the adsorption process. Results show that the adsorption capacity from 4.97 to 3.71 mg P/g slag when the solution pH was increased from 2.0 to 13.0 and phosphate initial concentration was 50 mg/L, indicating that adsorption capacity is largely dependent upon the pH of the system. The results of the competitive adsorption between phosphate and typical anions found in wastewater, such as NO3-, SO42- and Cl-, onto BOF slag reveal that BOF slag can selectively adsorb phosphate ions. The insignificant effect of NO3-, SO42- and Cl- on phosphate adsorption capacity indicates that phosphate adsorption is through a kind of inner-sphere complex reaction. During the adsorption process, the decrease of phosphate concentration in solution accompanied with an increase in pH values and concentrations of NO3-, SO42- and Cl- suggests that phosphate replaced the functional groups from the surface of BOF slag which infers that ligand exchange is the dominating mechanism for phosphate removal. At the same time, the simultaneous decreases in PO43- and total calcium, magnesium and aluminum concentration in solution indicate that chemical reaction and precipitation are other mechanisms of phosphate removal. (C) 2008 Elsevier B,V. All rights reserved.