Design, fabrication, and test of high-Tc superconducting DC reactor for inductive superconducting fault current limiter

被引：17

作者：

Ahn, MC ^{[1
]}

Lee, SJ

Kang, HK

Bae, DK

Joo, M

Kim, HS

Ko, TK

机构：

[1] Yonsei Univ, Dept Elect & Elect Engn, Seoul 120749, South Korea

[2] Freecomsyst Co Ltd, Seoul, South Korea

来源：

IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY | 2004年 / 14卷 / 02期

关键词：

DC reactor; solenoid coil; stacked tape; superconducting fault current limiter;

D O I：

10.1109/TASC.2004.830290

中图分类号：

TM [电工技术]; TN [电子技术、通信技术];

学科分类号：

0808 ; 0809 ;

摘要：

A high-T-c superconducting (HTS) DC reactor has been developed as a part of DC reactor type superconducting fault current limiter (SFCL) rated on 6.6 kV/200 A. The DC reactor was a solenoid coil and was wound with a 4-parallel stacked tape. This coil has 5 layers which are connected in series each other. The inductance of the coil is about 84 mH. This paper deals with the design, fabrication and testing of the DC reactor. For this design of the coil, a prototype solenoid coil had been used. Using the experimental result of a prototype solenoid, the number of stacks and the inductance were designed. The winding machine for the HTS solenoid was manufactured. Using this machine, the large-scale HTS solenoid using a Bi-2223 tape was fabricated successfully. Characteristics of the fabricated coil were observed through a measurement of voltage as current transportation.

引用

页码：827 / 830

页数：4

共 50 条

[1] Development of an inductive high-Tc superconducting fault current limiter model
Zannella, S
Arienti, A
Giunchi, G
Jansak, L
Majoros, M
Ottoboni, V
APPLIED SUPERCONDUCTIVITY 1997, VOLS 1 AND 2: VOL 1: SMALL SCALE AND ELECTRONIC APPLICATIONS; VOL 2: LARGE SCALE AND POWER APPLICATIONS, 1997, (158): : 1239 - 1242
[2] Reduction of fault current peak in an inductive high-Tc superconducting fault current limiter
Joo, M
CRYOGENICS, 2005, 45 (05) : 343 - 347
[3] Novel design and operational characteristics of inductive high-Tc superconducting fault current limiter
Joo, M
Ko, TK
IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, 1997, 7 (02) : 1005 - 1008
[4] Design, fabrication and testing of superconducting DC reactor for 1.2 kV/80 A inductive fault current limiter
Kang, H
Ahn, MC
Kim, YK
Bae, DK
Yoon, YS
Ko, TK
Kim, JH
Joo, J
IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, 2003, 13 (02) : 2008 - 2011
[5] Test of 1.2 MVA high-Tc superconducting fault current limiter
Paul, W
Lakner, M
Rhyner, J
Unternahrer, P
Baumann, T
Chen, M
Widenhorn, L
Guerig, A
APPLIED SUPERCONDUCTIVITY 1997, VOLS 1 AND 2: VOL 1: SMALL SCALE AND ELECTRONIC APPLICATIONS; VOL 2: LARGE SCALE AND POWER APPLICATIONS, 1997, (158): : 1173 - 1178
[6] Test of 1.2 MVA high-Tc superconducting fault current limiter
Paul, W
Lakner, M
Rhyner, J
Unternahrer, P
Baumann, T
Chen, M
Widenhorn, L
Guerig, A
SUPERCONDUCTOR SCIENCE & TECHNOLOGY, 1997, 10 (12): : 914 - 918
[7] Design and test results of 4.6 kV high-Tc superconducting fault current limiter
Yazawa, T
Yoneda, E
Matsuzaki, J
Shimada, M
Kuriyama, T
Nomura, S
Ohkuma, T
Sato, Y
Takahashi, Y
IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, 2001, 11 (01) : 2511 - 2514
[8] Design and test results of 66 kV high-Tc superconducting fault current limiter magnet
Yazawa, T.
Ootani, Y.
Sakai, M.
Otsuki, M.
Kuriyarna, T.
Urata, M.
Tokunaga, Y.
Inoue, K.
IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, 2006, 16 (02) : 683 - 686
[9] Development of high-Tc superconducting inductive current limiter for power systems
Meerovich, Victor
Sokolovsky, Vladimir
Jung, Grzegorz
Goren, Shaul
Cryogenics, 1994, 34 (Suppl) : 757 - 760
[10] Performance of a high-Tc superconducting fault current limiter - Design of a 6.6kV magnetic shielding type superconducting fault current limiter
Kado, H
Ichikawa, M
IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, 1997, 7 (02) : 993 - 996

← 1 2 3 4 5 →