Design and evaluation of surface irrigation systems applying an analytical formula in the irrigation district 085, La Begona, Mexico

被引:15
|
作者
Chavez, Carlos [1 ]
Fuentes, Carlos [2 ]
机构
[1] Autonomous Univ Queretaro, Fac Engn, Cerro de las Campanas Sn, Col Las Campanas 76010, Queretaro, Mexico
[2] Mexican Inst Water Technol, Cuernavaca, Morelos, Mexico
关键词
Analytical formula; Green and Ampt equation; Kinematic wave model; Efficient water use; Optimal discharge; Saint-Venant and Richards equations; FURROW IRRIGATION; SAINT-VENANT; WATER; SIMULATION;
D O I
10.1016/j.agwat.2019.04.027
中图分类号
S3 [农学(农艺学)];
学科分类号
0901 ;
摘要
The area under irrigation in Mexico is just over 6.64 million hectares, most of which is irrigated with surface gravity systems (borders or furrows). However, one of the main problems presented by these methods is the loss associated with deep infiltration, tailwaters, and flooding in some parts of the land as a result of a poor flow design at the entrance of the furrow or border. In this study, the evaluation of irrigation tests, the data of the plot and the net irrigation depth to be applied show that the optimum expense that can be put in each furrow during an irrigation event can be calculated under the hypothesis that with this expense, the historical water depths applied in the evaluated plots can be reduced. The results obtained in 250 irrigation tests in 1010 ha in the Irrigation District 085, La Begona, Guanajuato, Mexico, showed that average water depths decreased by 19 cm, irrigation time decreased 12 h ha(-1) on average, and the average volume saved was 2150 m(3) ha, which represented a total of 49% of the total volume used. In addition, the average efficiency rose from 51 to 86%.
引用
收藏
页码:279 / 285
页数:7
相关论文
共 29 条
  • [1] Feedforward control for the right margin of the main irrigation canal at the Begona district in Mexico
    Ruiz-Carmona, VM
    Brenes-Games, A
    SECOND I.F.A.C./I.S.H.S. WORKSHOP ON MATHEMATICAL AND CONTROL APPLICATIONS IN AGRICULTURE AND HORTICULTURE, 1996, (406): : 297 - 304
  • [2] Comparative analysis of three methods to determine canal capacities, applied to the La Begona irrigation district.: Hydraulic engineering in Mexico
    Iniguez-Covarrubias, Mauro
    de Leon-Mojarro, Benjamin
    Prado-Hernandez, Jorge Victor
    Rendon-Pimentel, Luis
    INGENIERIA HIDRAULICA EN MEXICO, 2007, 22 (02): : 81 - 90
  • [3] Development of Surface Irrigation Systems Design and Evaluation Software (SIDES)
    Adamala, Sirisha
    Raghuwanshi, N. S.
    Mishra, Ashok
    COMPUTERS AND ELECTRONICS IN AGRICULTURE, 2014, 100 : 100 - 109
  • [4] Analytical solution for optimum design of furrow irrigation systems
    Kiwan, ME
    HYDROLOGICAL PROCESSES, 1996, 10 (05) : 763 - 770
  • [5] Optimal design and management of surface irrigation systems
    Clyma, W
    Reddy, JM
    NATIONAL IRRIGATION SYMPOSIUM, PROCEEDINGS, 2000, : 298 - 303
  • [6] CHOOSING OPTIMAL-DESIGN DEPTH FOR SURFACE IRRIGATION SYSTEMS
    REDDY, JM
    CLYMA, W
    AGRICULTURAL WATER MANAGEMENT, 1983, 6 (04) : 335 - 349
  • [7] Evaluation of nitrate redistribution in surface and subsurface drip irrigation systems
    Arab, Sogand
    Mozaffari, Javad
    Nahvinia, Mohammad Javad
    WATER SA, 2022, 48 (03) : 271 - 277
  • [8] A simulation model for design and evaluation of micro-irrigation systems
    Pedras, CMG
    Pereira, LS
    IRRIGATION AND DRAINAGE, 2001, 50 (04) : 323 - 334
  • [9] THE DESIGN AND EVALUATION OF TRAVELLING GUN IRRIGATION SYSTEMS: ENROLADOR SOFTWARE
    Rolim, Joao
    Teixeira, Jose L.
    ENGENHARIA AGRICOLA, 2016, 36 (05): : 917 - 927
  • [10] Evaluation of performance of surface irrigation systems: Optimization of infiltration and roughness parameters
    Calejo, MJ
    Sousa, PL
    Pereira, LS
    WATER AND THE ENVIRONMENT: INNOVATIVE ISSUES IN IRRIGATION AND DRAINAGE, 1998, : 140 - 148