Unimorph and bimorph piezoelectric energy harvester stimulated by β-emitting radioisotopes: a modeling study

We use energy methods and lumped-element modelling in the analysis and optimization of a miniaturized aluminum nitride based piezoelectric energy harvester which utilizes tritiated silicon as an uninterrupted energy source. Tritiated silicon serves as a radioisotope source which emits energetic beta particles that results in an electrostatic force between the radioactive source and collector that traps the emitted particles. The generated electrostatic force will drive the charging and actuating cycles of the piezoelectric cantilever leading to a continuous charge-discharge cycles, thus inducing vibrations in the piezoelectric cantilever. The energy generated from the piezoelectric thin-film is appropriately rectified and stored to provide continuous and uninterrupted electrical power to a low-power devices. The modelled results have been benchmarked against available experimental data for a unimorph piezoelectric harvester with very good agreement. Furthermore, the model was applied to a bimorph piezoelectric harvester, showing that the output power can be doubled in relation to a unimorph design. Moreover, the model accounts for the entire range of design and operating factors such as the ambient medium and associated damping losses, current leakage, and device scaling.