Study on an Open CNC System of 3-axis Micro Milling Machine Tool

被引：2
|
作者：
Huang, L. [1 ]
He, N. [1 ]
Li, L. [1 ]
机构：
[1] Nanjing Univ Aeronaut & Astronaut, Coll Mech & Elect Engn, Nanjing, Peoples R China
来源：
ULTRA-PRECISION MACHINING TECHNOLOGIES | 2009年 / 69-70卷
关键词：
Micro milling; Open CNC system; Motion control; C#; Software exploitation;
D O I：
10.4028/www.scientific.net/AMR.69-70.369
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
The traditional CNC system is established on conventional machine tool mainly using ball screws. This could not suitable for micro mechanical machining with linear motor which could provide high speed, high precision, fast response and zero backlash. In this paper, a 3-axis micro milling machine tool with an open CNC system has been developed based on motion controller and linear motors. Considering the requirements of micro milling several special functions just like micro cutting tool setting are provided in exploited control software. The system dynamic characteristics are evaluated through experiments with servo parameters adjustments. In the following machining experiments, the whole system is proved economically and effectively.
引用
收藏
页码：369 / 373
页数：5
相关论文
共 50 条
  • [1] Virtual training environment for a 3-axis CNC milling machine
    Wasfy, Tamer M.
    Wasfy, Ayman M.
    El-Mounayri, Hazim
    Aw, Daniel
    [J]. Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2005, Vol 3, Pts A and B, 2005, : 1111 - 1120
  • [2] Design and Structural Analysis of 3-Axis CNC Benchtop Milling Machine
    Abd Rahman, Z.
    Mohamed, S.B.
    Minhat, M.
    Zulkifli, A.R.
    Norman, M.A.M.
    [J]. International Journal of COMADEM, 2022, 25 (04): : 49 - 52
  • [3] Geometric and force errors compensation in a 3-axis CNC milling machine
    Raksiri, C
    Parnichkun, M
    [J]. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2004, 44 (12-13): : 1283 - 1291
  • [4] Analysis of the Table Motion of a 3-Axis CNC Milling Machine Tool at Start-up and Braking
    Jozwik, Jerzy
    Kuric, Ivan
    Lukaszewicz, Andrzej
    [J]. ADVANCED MANUFACTURING PROCESSES (INTERPARTNER-2019), 2020, : 108 - 117
  • [5] 3-Axis CNC Milling in Architectural Design
    Aitcheson, Robert
    Friedman, Jonathan
    Seebohm, Thomas
    [J]. INTERNATIONAL JOURNAL OF ARCHITECTURAL COMPUTING, 2005, 3 (02) : 161 - 180
  • [6] Structural modeling and simulation of miniaturized machine tool: 3-axis vertical micro-end-milling system
    Wang, Wei
    Kvveon, Sung-Hwan
    Kim, In
    Yang, Seung-Han
    [J]. INTERNATIONAL JOURNAL OF MODERN PHYSICS B, 2006, 20 (25-27): : 3811 - 3816
  • [7] Design and Development of 3-Axis Benchtop CNC Milling Machine for Educational Purpose
    Abd Rahman, Zammeri
    Mohamed, Saiful Bahri
    Minhat, Mohammad
    Abd Rahman, Zulkifli
    [J]. INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING, 2023, 15 (01): : 145 - 160
  • [8] Development of a 3-axis Desktop Milling Machine and a CNC System Using Advanced Modern Control Algorithms
    Kim, Byung-Sub
    Ro, Seung-Kook
    Park, Jong-Kweon
    [J]. INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING, 2010, 11 (01) : 39 - 47
  • [9] Development of a 3-axis desktop milling machine and a CNC system using advanced modern control algorithms
    Byung-Sub Kim
    Seung-Kook Ro
    Jong-Kweon Park
    [J]. International Journal of Precision Engineering and Manufacturing, 2010, 11 : 39 - 47
  • [10] A New Concept of Jig Rotary Holder System for 3-Axis CNC Milling Machine Operated by the Main Machine Control
    Silva, F. J. G.
    Campilho, R. D. S. G.
    Sousa, V. F. C.
    Coelho, L. F. P.
    Ferreira, L. P.
    Pereira, M. T.
    Matos, J.
    [J]. JOURNAL OF TESTING AND EVALUATION, 2022,
12345