Experimental validation of circuit models for Bulk Current Injection (BCI) Test on shielded coaxial cables

被引：0
|
作者：
Antonini, G [1 ]
Scogna, AC [1 ]
Orlandi, A [1 ]
Rizzi, RM [1 ]
机构：
[1] Univ Aquila, Dept Elect Engn, UAq EMC Lab, I-67040 Laquila, Italy
来源：
2004 INTERNATIONAL SYMPOSIUM ON ELECTROMAGNETIC COMPATIBILITY, SYMPOSIUM RECORD 1-3 | 2004年
关键词：
D O I：
暂无
中图分类号：
TM [电工技术]; TN [电子技术、通信技术];
学科分类号：
0808 ; 0809 ;
摘要：
In order to validate, by means of measurement, some existing equivalent circuit models for the Bulk Current Injection test: a) a procedure is proposed to developed a proper circuit model for the injection clamp and the obtained circuit is introduced in the global one representing the overall cable, b) a suitable experimental set-up is built and used. The measured induced voltages at the terminations of a shielded coaxial cables are compared with those computed by the equivalent circuit. Upper and lower bounds are quantified in order to assess the order of accuracy of the predicted results.
引用
收藏
页码：63 / 68
页数：6
相关论文
共 50 条
  • [1] Circuit model for bulk current injection test on shielded coaxial cables
    Orlandi, A
    [J]. IEEE TRANSACTIONS ON ELECTROMAGNETIC COMPATIBILITY, 2003, 45 (04) : 602 - 615
  • [2] Circuit Models for Bulk Current Injection (BCI) Clamps with Multiple Cables
    Nayak, Bibhu Prasad
    Das, Arkaprovo
    Vedicherla, Sreenivasulu Reddy
    Gope, Dipanjan
    [J]. 2018 JOINT IEEE INTERNATIONAL SYMPOSIUM ON ELECTROMAGNETIC COMPATIBILITY AND 2018 IEEE ASIA-PACIFIC SYMPOSIUM ON ELECTROMAGNETIC COMPATIBILITY (EMC/APEMC), 2018, : 1160 - 1163
  • [3] Equivalent circuit model of a bundle of cables for bulk current injection (BCI) test
    Orlandi, Antonio
    Antonini, Giulio
    Rizzi, Romeo Michele
    [J]. IEEE TRANSACTIONS ON ELECTROMAGNETIC COMPATIBILITY, 2006, 48 (04) : 701 - 713
  • [4] Including Experimental Aging of Shielded Cables into Bulk Current Injection Simulations
    Leppaaho, Oskari
    Lafon, Frederic
    Ferreri, Bruno
    Fernandez-Lopez, Priscila
    Stojanovic, Marine
    Perdriau, Richard
    Ramdani, Mohammed
    [J]. 2022 INTERNATIONAL SYMPOSIUM ON ELECTROMAGNETIC COMPATIBILITY (EMC EUROPE 2022), 2022, : 811 - 815
  • [5] An Experimental Analysis of the Effects of Wiring Harness during Bulk Current Injection (BCI) Test
    Li, Jinlong
    Gong, Zeng
    Jin, Shanyi
    Tian, Heqing
    Ma, Shiping
    [J]. 2017 IEEE 5TH INTERNATIONAL SYMPOSIUM ON ELECTROMAGNETIC COMPATIBILITY (EMC-BEIJING), 2017,
  • [6] Circuit models of lossy coaxial shielded cables to analyze radiated and conducted susceptibilities with unmatched line loads
    [J]. 2017, Sociedade Brasileira de Microondas e Optoeletronica (SBMO) (16):
  • [7] Versatile Susceptibility Model of Complex Systems for Bulk Current Injection (BCI) Test
    Cheaito, Hassan
    Sokhna, Mor-Diop
    Ali, Marvan
    Clave, Edith
    Breard, Arnaud
    Vollaire, Christian
    [J]. 2016 IEEE INTERNATIONAL SYMPOSIUM ON ELECTROMAGNETIC COMPATIBILITY (EMC), 2016, : 513 - 518
  • [8] SPICE Models to Analyze Radiated and Conducted Susceptibilities of Shielded Coaxial Cables
    Xie, Haiyan
    Wang, Jianguo
    Fan, Ruyu
    Liu, Yinong
    [J]. IEEE TRANSACTIONS ON ELECTROMAGNETIC COMPATIBILITY, 2010, 52 (01) : 215 - 222
  • [9] Experimental investigation of noise immunity diagnosis for battery drived circuit by bulk current injection test
    Sasabe, K
    Yoshida, K
    Fujiwara, O
    [J]. IEICE TRANSACTIONS ON COMMUNICATIONS, 2000, E83B (03) : 618 - 621
  • [10] Equivalent circuit models for the analysis of coaxial cables immunity
    Caniggia, S
    Maradei, F
    [J]. 2003 IEEE SYMPOSIUM ON ELECTROMAGNETIC COMPATIBILITY, SYMPOSIUM RECORD, VOLS 1 AND 2, 2003, : 881 - 886
12345