Effect and action mechanism of ultrasonic assistance on microstructure and mechanical performance of laser cladding 316L stainless steel coating

The effect and mechanism of ultrasonic vibration on the microstructure and performance of laser cladding 316L coating has been studied, providing a theoretical basis and technical support for the application of the ultrasonic assisted laser cladding process. The results show that ultrasonic vibrations with different amplitudes can effectively improve the macroscopic forming quality of the cladding layer, among which the ultrasonic vibration with 17.5 mu m amplitude is the best. Ultrasonic vibration can also significantly improve the micro-forming quality of the cladding layer, such as homogenizing the structure, refining grains and reducing porosity. The wear mechanism of the cladding layer with an ultrasonic assistance of 17.5 mu m is mainly abrasive wear, so the wear resistance has been significantly improved. The ultrasonic-assisted cladding layer exhibits significant passivation behavior in 3.5 wt% NaCl solution. It may be that the surface roughness reduction and grain refinement caused by ultrasonic assistance can improve the integrity and compactness of the cladding layer, so the dynamic equilibrium process of the dissolution and reformation of the passive film is changed, which can improve the corrosion resistance of the surface. There are some equiaxed grains in the columnar-grains area of the ultrasonic assisted cladding layer, mainly because the inside of some primary columnar grains has gone through a process of lattice distortion -> dislocation multiplication -> substructure rotation -> formation of small-angle grain boundary -> misorientation accumulation -> formation of new grains in the process of ultrasonic-assisted laser cladding of 316L stainless steel.