Temperature dependence of impact deformation behavior of single crystal Ni based superalloy

The impact test was carried out to investigate the intermediate temperature brittleness of single crystal Ni based superalloy. The samples were impacted at the velocity of similar to 5 m s(-1). The results showed that the impact toughness also exhibited intermediate temperature brittleness, which is similar to the situation in tensile. The samples showed the highest impact toughness at 600 degrees C but exhibited the lowest impact toughness at 760 degrees C. Results showed that the variety of impact toughness was due to the deformation mechanism. At 600 degrees C, a/2 < 110 > dislocation slips on the {111} slip system were attributed to the high impact toughness; however, a/2 < 110 > dislocation slips from octahedral {111} planes to cubic {100} planes resulted in significant work hardening, leading to the decrease of impact toughness.