Processing, microstructure and mechanical properties of in situ Al-based metal matrix composite reinforced with 22 wt%WAI12 particles

被引：2

作者：

Cai, Shuguang ^{[1
]}

Ma, Xianfeng ^{[1
]}

Tang, Huaguo ^{[1
]}

Zhao, Wei ^{[1
]}

Zhu, Changjun ^{[1
]}

Yan, Junmin ^{[1
]}

Qiao, Zhuhui ^{[1
]}

Zhao, Bo ^{[1
]}

机构：

[1] Chinese Acad Sci, Changchun Inst Appl Chem, Grad Sch, Changchun 130022, Peoples R China

来源：

ADVANCED ENGINEERING MATERIALS | 2006年 / 8卷 / 08期

关键词：

D O I：

10.1002/adem.200600008

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The structure and characterization of in situ Al-based Metal Matrix Composites (MMC) reinforced with Al2O3 and TiC produced by hot isostatic pressing (HIP) technique, were analyzed. The observations indicated that the mechanical performance of Al-10wt%TiO2-1.5wt%C is higher than Al-10wt%TiO2 due to formation of TiC and elimination of large intermetallic Al3Ti plates. In situ Al-22wt%WAl12 composite was fabricated from Al-15wt%W 14Al86 system via mechanical alloying (MA) and vacuum hot pressing (HP). The formation of WAl 12 particulates was confirmed by XRD and EDX studies, which formed a clean interface with aluminum matrix. The results of tensile test revealed that the incorporation of W Al12 to the Al matrix and full densification of the sample were beneficial to enhance the mechanical performance of in situ composite.

引用

页码：740 / 743

页数：4

共 50 条

[1] Processing, microstructure and mechanical properties of Al-based metal matrix composites reinforced with mechanically alloyed particles
A. K. Chaubey
S. Scudino
N. K. Mukhopadhyay
J. Eckert
[J]. Journal of Materials Research, 2016, 31 : 1229 - 1236
[2] Erratum to: Processing, microstructure and mechanical properties of Al-based metal matrix composites reinforced with mechanically alloyed particles
A.K. Chaubey
S. Scudino
N.K. Mukhopadhyay
J. Eckert
[J]. Journal of Materials Research, 2016, 31 : 1372 - 1372
[3] Analysis of mechanical properties of Al-based metal matrix composite reinforced with ES and RHA
Yadav, Rajat
Dwivedi, Vijay Kumar
Islam, Anas
Dwivedi, Shashi Prakash
[J]. WORLD JOURNAL OF ENGINEERING, 2021, 18 (06) : 930 - 937
[4] Structure, thermal and mechanical properties of in situ Al-based metal matrix composite reinforced with Al2O3 and TiC submicron particles
Yu, P
Mei, Z
Tjong, SC
[J]. MATERIALS CHEMISTRY AND PHYSICS, 2005, 93 (01) : 109 - 116
[5] Processing, microstructure and mechanical properties of Al-based metal matrix composites reinforced with mechanically alloyed particles (vol 31, pg 1229, 2016)
Chaubey, A. K.
Scudino, S.
Mukhopadhyay, N. K.
Eckert, J.
[J]. JOURNAL OF MATERIALS RESEARCH, 2016, 31 (09) : 1372 - 1372
[6] Microstructure and mechanical behavior of high toughness Al-based metal matrix composite reinforced with in-situ formed nickel aluminides
Pariyar, Abhishek
Perugu, Chandra S.
Dash, K.
Kailas, Satish V.
[J]. MATERIALS CHARACTERIZATION, 2021, 171
[7] Tribological properties of Ti-aluminide reinforced Al-based in situ metal matrix composite
Roy, D
Basu, B
Mallick, AB
[J]. INTERMETALLICS, 2005, 13 (07) : 733 - 740
[8] The properties and microstructure of Al-based composites reinforced with ceramic particles
Smagorinski, ME
Tsantrizos, PG
Grenier, S
Brzezinski, T
Kim, G
[J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1998, 244 (01): : 86 - 90
[9] In-situ TiC reinforced Al-4Cu matrix composite: Processing, microstructure and mechanical properties
Zhang, Jifeng
Zhang, Dashan
Zhu, Heguo
Xie, Zonghan
[J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2020, 794
[10] Effect of mechanical mixing on the microstructure and mechanical properties of Al-based metal matrix composites reinforced with nanocrystalline Al-Ca intermetallics
Chaubey, A. K.
Kumar, Rohit
Sahoo, Tapas
[J]. 4TH NATIONAL CONFERENCE ON PROCESSING AND CHARACTERIZATION OF MATERIALS, 2015, 75

← 1 2 3 4 5 →