Alumina-based monofoams utilizing superplastic deformation facilitated by the addition of magnesia or magnesium aluminate spinel

被引：10
|
作者：
Obata, Mako [1 ]
Hayashi, Hidetaka [1 ]
Kishimoto, Akira [1 ]
机构：
[1] Okayama Univ, Grad Sch Nat Sci & Technol, Div Chem & Biochem, Okayama 7008530, Japan
来源：
JOURNAL OF ALLOYS AND COMPOUNDS | 2009年 / 471卷 / 1-2期
关键词：
Sintering; Ceramics; Oxide materials; Spinel; Grain boundary; TENSILE DUCTILITY; ZIRCONIA; CERAMICS; FABRICATION;
D O I：
10.1016/j.jallcom.2008.03.136
中图分类号：
O64 [物理化学（理论化学）、化学物理学];
学科分类号：
070304 ; 081704 ;
摘要：
Alumina-based ceramic foam utilizing the superplastic deformation after sintering has been proposed and demonstrated by the present authors. Effects of two kinds of additives, magnesia or magnesium aluminate spinel on the. figure of alumina-based ceramic foams were examined. In both cases, total porosity increased with increasing the addition amount up to 30 mol%. With the same addition amount, the porosity of spinel-added foam was slightly larger than that of magnesia-added one. On pore expansion, relative density of pore shell decreased while the density degradation degree of magnesia-added foam was more serious than that of spinel-added one. (C) 2008 Elsevier B.V. All rights reserved.
引用
收藏
页码：L32 / L35
页数：4
相关论文
共 10 条
1