Wear mechanism of coated cemented carbide tool in cutting of inconel 718 super-heat-resisting alloy

被引：0
|
作者：
Itakura, K [1 ]
Kuroda, M [1 ]
Omokawa, H [1 ]
Itani, H [1 ]
Yamamoto, K [1 ]
Ariura, Y [1 ]
机构：
[1] Hiroshima Inst Technol Polytech, Nishi Ku, Hiroshima, Japan
来源：
INTERNATIONAL JOURNAL OF THE JAPAN SOCIETY FOR PRECISION ENGINEERING | 1999年 / 33卷 / 04期
关键词：
Inconel; 718; wear mechanism; coated cemented carbide tool; super heat resisting alloy; abrasive wear; adhesive wear; interrupted cutting;
D O I：
暂无
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
In continuous cutting, adhesive is formed on the tool rake Face and cutting is continued while taking the form of adhesive as protective layers. At the beginning of cutting, both adhesive wear and abrasive wear of the coating film on the flank progress. On the other hand, in interrupted cutting, when the tool parts from the workpiece the adhesive formed on the rake face is removed and the coating film flake at the same time. With this repetition, tool wear progresses. Flaking can be restrained by reducing undeformed-chip thickness at the end of cutting.
引用
收藏
页码：326 / 332
页数：7
相关论文
共 50 条
  • [1] Tool wear appearance and failure mechanism of coated carbide tools in micro-milling of Inconel 718 super alloy
    Lu, Xiaohong
    Jia, Zhenyuan
    Wang, Hua
    Si, Likun
    Liu, Yongyun
    Wu, Wenyi
    [J]. INDUSTRIAL LUBRICATION AND TRIBOLOGY, 2016, 68 (02) : 267 - 277
  • [2] Tool Wear of Carbide Cutting Inserts Coated with TiAlN and AlTiSiN in Finish Turning of Inconel 718
    Lisowicz, Joanna
    Habrat, Witold
    Krupa, Krzysztof
    Fieden, Mateusz
    [J]. ADVANCES IN MANUFACTURING ENGINEERING AND MATERIALS II, ICMEM 2020, 2021, : 226 - 235
  • [3] Carbide tool wear mechanism in turning of Inconel 718 superalloy
    Liao, YS
    Shiue, RH
    [J]. WEAR, 1996, 193 (01) : 16 - 24
  • [4] Carbide tool wear mechanism in turning of Inconel 718 superalloy
    Natl Taiwan Univ, Taipei, Taiwan
    [J]. Wear, 1 (16-24):
  • [5] Study on wear mechanism of carbide tool in machining Inconel 718
    Fan, Yihang
    Zhou, Liang
    Song, Shuangzhu
    Sun, Fenglian
    [J]. ADVANCES IN MACHINING AND MANUFACTURING TECHNOLOGY XII, 2014, 589-590 : 323 - +
  • [6] Effect of cutting speed on the carbide cutting tool in milling Inconel 718 alloy
    Hadi, Musfirah Abdul
    Ghani, Jaharah A.
    Haron, Che Hassan Che
    Kasim, Mohd. Shahir
    [J]. JOURNAL OF MATERIALS RESEARCH, 2016, 31 (13) : 1885 - 1892
  • [7] Effect of cutting speed on the carbide cutting tool in milling Inconel 718 alloy
    Musfirah Abdul Hadi
    Jaharah A. Ghani
    Che Hassan Che Haron
    Mohd. Shahir Kasim
    [J]. Journal of Materials Research, 2016, 31 : 1885 - 1892
  • [8] Interrupted cutting of Inconel 718 with AlTiSiN coated cemented carbide tool under high pressure coolant supply
    Liu, Chi Hsin
    Sugihara, Tatsuya
    Enomoto, Toshiyuki
    [J]. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY, 2022, 78 : 124 - 133
  • [9] Cutting forces and wear in dry machining of Inconel 718 with coated carbide tools
    Devillez, A.
    Schneider, F.
    Dominiak, S.
    Dudzinski, D.
    Larrouquere, D.
    [J]. WEAR, 2007, 262 (7-8) : 931 - 942
  • [10] Study on tool wear and wear mechanism when end milling inconel 718 using TiAlN coated carbide
    Kamdani, K.
    Hasan, S.
    Ahmad, A. F. I.
    Lajis, M. A.
    [J]. PROCEEDINGS OF ASIA INTERNATIONAL CONFERENCE ON TRIBOLOGY 2018 (ASIATRIB 2018), 2018, : 330 - 331
12345