Austenite stability and deformation-induced transformation mechanism in cold-rolled medium-Mn steel

被引：35
|
作者：
Zhou, T. P. [1 ,2 ]
Wang, C. Y. [2 ]
Wang, C. [2 ]
Cao, W. Q. [2 ]
Chen, Z. J. [1 ]
机构：
[1] Chongqing Univ, Coll Mat Sci & Engn, Chongqing 400044, Peoples R China
[2] Cent Iron & Steel Res Inst, Beijing 100081, Peoples R China
来源：
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | 2020年 / 798卷
基金：
中国国家自然科学基金; 国家重点研发计划;
关键词：
Medium Mn steel; Intercritical annealing; Austenite; Mechanical stability; Thermal stability; Stress- and strain-induced transformation; INDUCED-PLASTICITY STEEL; RETAINED AUSTENITE; TENSILE PROPERTIES; GRAIN-SIZE; BEHAVIOR; MARTENSITE; TEMPERATURE; STRENGTH; MICROSTRUCTURE; DEPENDENCE;
D O I：
10.1016/j.msea.2020.140147
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
The austenite stability and tensile properties of intercritically annealed samples of cold-rolled medium-Mn steel (0.15C-5Mn-1.1Al) were investigated. The influence of austenite grain size and element concentration on the mechanical stability of austenite was studied, which demonstrated that the C content in austenite was a critical factor governing the mechanical stability of austenite. The thermal stability of austenite in cold-rolled medium-Mn steel samples annealed for different durations at different temperatures was quantitatively analyzed. The results showed that the effect of annealing temperature on the thermal stability of austenite was stronger than that of annealing time. In addition, the samples subjected to heat treatment under different conditions resulted in different work hardening (WH) behavior and mechanical properties due to variations in the mechanical stability of the retained austenite. It was concluded that these differences were related to the changes in stressand strain induced transformation modes of the retained austenite.
引用
收藏
页数：9
相关论文
共 50 条
  • [1] Austenite Stability and Its Effect on the Ductility of the Cold-rolled Medium-Mn Steel
    Hu, Jun
    Cao, Wenquan
    Wang, Cunyu
    Dong, Han
    Li, Jian
    [J]. ISIJ INTERNATIONAL, 2014, 54 (08) : 1952 - 1957
  • [2] Austenite transformation and deformation behavior of a cold-rolled medium-Mn steel under different annealing temperatures
    Xu, Zigan
    Shen, Xiao
    Allam, Tarek
    Song, Wenwen
    Bleck, Wolfgang
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2022, 829
  • [3] Enhancement austenite content in medium-Mn steel by introducing cold-rolled deformation and inhibiting subsequent recrystallization
    Li, Tianle
    Yan, Shu
    Liu, Xianghua
    [J]. MATERIALS LETTERS, 2021, 301
  • [4] Austenite stability and deformation behavior in a cold-rolled transformation-induced plasticity steel with medium manganese content
    Cai, Z. H.
    Ding, H.
    Misra, R. D. K.
    Ying, Z. Y.
    [J]. ACTA MATERIALIA, 2015, 84 : 229 - 236
  • [5] Multi-scale characterization of austenite reversion and martensite recovery in a cold-rolled medium-Mn steel
    Benzing, J. T.
    da Silva, A. Kwiatkowski
    Morsdorf, L.
    Bentley, J.
    Ponge, D.
    Dutta, A.
    Han, J.
    McBride, J. R.
    Van Leer, B.
    Gault, B.
    Raabe, D.
    Wittig, J. E.
    [J]. ACTA MATERIALIA, 2019, 166 : 512 - 530
  • [6] The expansion behavior caused by deformation-induced martensite to austenite transformation in heavily cold-rolled metastable austenitic stainless steel
    He, Yanming
    Zhang, Jiaxin
    Wang, Yuhui
    Wang, Yuefeng
    Wang, Tiansheng
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2019, 739 : 343 - 347
  • [7] Effect of a two-step annealing process on deformation-induced transformation mechanisms in cold-rolled medium manganese steel
    Ye, Qizhe
    Han, Gang
    Xu, Juanping
    Cao, Zhongqian
    Qiao, Lijie
    Yan, Yu
    [J]. Materials Science and Engineering: A, 2022, 831
  • [8] Effect of a two-step annealing process on deformation-induced transformation mechanisms in cold-rolled medium manganese steel
    Ye, Qizhe
    Han, Gang
    Xu, Juanping
    Cao, Zhongqian
    Qiao, Lijie
    Yan, Yu
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2022, 831
  • [9] Effects of the austenitizing temperature on the mechanical properties of cold-rolled medium-Mn steel system
    Zhao, Z. Z.
    Liang, J. H.
    Zhao, A. M.
    Liang, J. T.
    Tang, D.
    Gao, Y. P.
    [J]. JOURNAL OF ALLOYS AND COMPOUNDS, 2017, 691 : 51 - 59
  • [10] Deformation-induced martensitic transformation kinetics and correlative micromechanical behavior of medium-Mn transformation-induced plasticity steel
    Zhang, Minghe
    Chen, Haiyang
    Wang, Youkang
    Wang, Shengjie
    Li, Runguang
    Li, Shilei
    Wang, Yan-Dong
    [J]. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 2019, 35 (08) : 1779 - 1786
12345