Radiation-hardened Erbium-doped optical fibers and amplifiers for future high-dose space missions

We present a new class of Erbium-doped optical fibers: the Hole-Assisted Carbon-Coated, HACC fibers. Optical fibers with this particular structure have been made by iXFiber on the basis of an appropriate choice of codopants in their core and claddings. By using an additional pre-treatment with deuterium (D-2) loading authorized by the HACC structure, we highlight the efficiency of such components and demonstrated that this new type of fiber presents a strongly enhanced radiation resistance compared to the other types of erbium-doped optical fibers studied in litterature. We also built an Erbium-doped Fiber Amplifier (EDFA) with one of these HACC fibers and compared its radiation response to the one of the same fiber composition but without the HACC structure and D-2 loading. We tested the performances of this EDFA under gamma-rays and characterize its gain degradation up to doses of 315 krad. Before irradiation, the amplifier presents a gain of about 31 dB that is comparable to the optical performances of amplifiers based on HACC fibers without the D-2 pre-treatment and the HACC structure. During irradiation, our results demonstrate that the tested amplifier is nearly unaffected by radiations. Its gain slowly decreases with the dose at a slope rate of about -2.2x10(-3) dB/krad. This strong radiation resistance (enhancement of a factor of x10 compared to the previous or conventional radiation tolerant EDFA) will authorize the use of HACC doped fibers and amplifiers for various applications in space for missions associated both with low or large irradiation doses.