Effect of internal stresses on the magnetic properties of non-oriented Fe-3wt.% Si and (Fe,Co)-2wt.% V alloys

被引:25
|
作者
Hug, E
Hubert, O
Van Houtte, JJ
机构
[1] Univ Technol Compiegne, Dept Genie Mecan, CNRS, UTC,UMR 6066,Lab Roberval, F-60205 Compiegne, France
[2] Univ Paris 06, CNRS, ENS Cachan, Lab Mecan & Technol, F-94235 Cachan, France
[3] Univ Technol Compiegne, Serv Electron, F-60205 Compiegne, France
关键词
magnetic measurements; internal stresses; metallurgical defects; magnetoplastic anisotropy; non-oriented Fe-3wt.%; Si alloys; (Fe; Co)-2wt.% V alloys;
D O I
10.1016/S0921-5093(01)01722-1
中图分类号
TB3 [工程材料学];
学科分类号
0805 ; 080502 ;
摘要
The magnetic properties of soft magnetic materials are very sensitive to mechanical strengthening and especially to plastic straining. In a first approximation, the degradation of the magnetisation with the plastic strain level is supposed to be roughly isotropic. However, even after uniaxial strengthening, the multiaxial residual stresses induce directional fluctuations of these degradations. An experimental device has been created in order to study the effect of such internal stresses on magnetic behaviour. Experimental results are given for non-oriented Fe-3wt.% Si and (Fe,Co)-2wt.% V thin sheets. An attenuated effect of the strengthening is observed in the direction perpendicular to the applied stress whatever the direction of the latter inside the sheet plane. This phenomenon is discussed in terms of metallurgical defects (dislocation structures, grain boundaries and antiphase boundaries), internal stresses and magnetocrystalline anisotropy. (C) 2002 Elsevier Science B.V. All rights reserved.
引用
收藏
页码:193 / 202
页数:10
相关论文
共 50 条
  • [1] Magnetic and mechanical properties of additive manufactured Fe-3wt.% Si material
    Gao, Shuohong
    Liao, Hanlin
    Yan, Xingchen
    Xie, Qingge
    Chang, Cheng
    Lu, Bingwen
    Zhang, Xinyue
    Fenineche, Nouredine
    Liu, Min
    [J]. JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS, 2023, 580
  • [2] Effect of Cooling Rate on Magnetic Properties of Fe-3.3 wt% Si Non-oriented Electrical Steel
    Du, Yizhou
    O'Malley, Ronald J.
    Buchely, M. F.
    [J]. METALS AND MATERIALS INTERNATIONAL, 2022, 28 (12) : 3160 - 3171
  • [3] Effect of rolling process on magnetic properties of Fe-3.3 wt% Si non-oriented electrical steel
    Yizhou Du
    Ronald J. O’Malley
    M. F. Buchely
    Paul Kelly
    [J]. Applied Physics A, 2022, 128
  • [4] Effect of rolling process on magnetic properties of Fe-3.3 wt% Si non-oriented electrical steel
    Du, Yizhou
    O'Malley, Ronald J.
    Buchely, M. F.
    Kelly, Paul
    [J]. APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING, 2022, 128 (09):
  • [5] Effect of Cooling Rate on Magnetic Properties of Fe-3.3 wt% Si Non-oriented Electrical Steel
    Yizhou Du
    Ronald J. O’Malley
    M. F. Buchely
    [J]. Metals and Materials International, 2022, 28 : 3160 - 3171
  • [6] Effect of Laser Energy Density on Surface Morphology, Microstructure, and Magnetic Properties of Selective Laser Melted Fe-3wt.% Si Alloys
    Shuohong Gao
    Xingchen Yan
    Cheng Chang
    Min Eric Aubry
    Hanlin Liu
    Nouredine Liao
    [J]. Journal of Materials Engineering and Performance, 2021, 30 : 5020 - 5030
  • [7] Activation Energy of Recrystallization in Fe-3wt. %Si Alloys with Different S Contents
    Mao, Weimin
    Zhang, Maohua
    Yang, Ping
    Wang, Kaiping
    [J]. RECRYSTALLIZATION AND GRAIN GROWTH V, 2013, 753 : 181 - 184
  • [8] Effect of Laser Energy Density on Surface Morphology, Microstructure, and Magnetic Properties of Selective Laser Melted Fe-3wt.% Si Alloys
    Gao, Shuohong
    Yan, Xingchen
    Chang, Cheng
    Aubry, Eric
    Liu, Min
    Liao, Hanlin
    Fenineche, Nouredine
    [J]. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2021, 30 (07) : 5020 - 5030
  • [9] Correction to: Effect of Laser Energy Density on Surface Morphology, Microstructure, and Magnetic Properties of Selective Laser Melted Fe-3wt.% Si Alloys
    Shuohong Gao
    Xingchen Yan
    Cheng Chang
    Eric Aubry
    Min Liu
    Hanlin Liao
    Nouredine Fenineche
    [J]. Journal of Materials Engineering and Performance, 2022, 31 : 5159 - 5159
  • [10] Magnetic behaviour versus tensile deformation mechanisms in a non-oriented Fe-(3 wt.%)Si steel
    Iordache, VE
    Hug, E
    Buiron, N
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2003, 359 (1-2): : 62 - 74