Comparison of the apparent masses and cross-axis apparent masses of seated humans exposed to single- and dual-axis whole-body vibration

Humans are exposed to whole-body vibration in many types of environment. In almost all cases, the vibration to which the human is exposed comprises multi-axis vibration, such that vibration occurs in all directions simultaneously. Despite the complex nature of vibration to which humans are exposed in the workplace, almost all laboratory studies investigating the biomechanical response of the person have been completed using single-axis simulators. This paper presents a study whereby 15 male subjects were exposed to single-axis whole-body vibration in the x-, y- and z-directions and dual-axis vibration in the xy-, xz-, and yz-directions using a 6 degree-of-freedom vibration simulator. All vibration magnitudes were 0.4 ms(-2) rms in each axis. Acceleration and force was measured in the x-, y-, and z-direction during all trials. Subjects sat in two postures ('back-on' and 'back-off) on a flat rigid seat. Apparent masses measured using single-axis and dual-axis vibration stimuli showed comparable results; similarly, cross-axis apparent masses (i.e. the ratio of the force in one direction to the acceleration in another direction) were almost identical for the single- and dual-axis vibration stimuli. All results were in agreement with data previously published using single-axis vibration. In most cases, the peaks in the apparent mass and the cross-axis apparent mass occurred at a slightly lower frequency for the dual-axis vibration than for the single-axis vibration. It is hypothesised that this change is due to a nonlinear effect, analogous to that which occurs with increasing vibration magnitude for single-axis vibration. (c) 2006 Elsevier Ltd. All rights reserved.