Grey-Taguchi optimization of Wire-EDM parameters for P20 tool steel

被引：8
|
作者：
Priyadarshini, M. [1 ]
Biswas, C. K. [1 ]
Behera, A. [2 ]
机构：
[1] Natl Inst Technol, Dept Mech Engn, Rourkela 769008, India
[2] Natl Inst Technol, Dept Met & Mat Engn, Rourkela 769008, India
来源：
PROCEEDINGS OF 2019 5TH INTERNATIONAL CONFERENCE ON MECHATRONICS AND ROBOTICS ENGINEERING (ICMRE 2019) | 2019年
关键词：
Wire EDM; low-carbon mold steel; Material removal rate; Kerf width; MATERIAL REMOVAL RATE; SURFACE-ROUGHNESS; MRR;
D O I：
10.1145/3314493.3314506
中图分类号：
TP301 [理论、方法];
学科分类号：
081202 ;
摘要：
P20 tool steel is low carbon tool steel which produces molds, punches and dies. This requires being cut for intricate shapes and profiles that can be done with Wire Electro Discharge Machine (WEDM), which is a non-contact process and can produce intricate shapes more precisely. As the tool steel is more hard, tough and wear resistive, so, attempts are made to machine it using WEDM with Pulse-on-time (Ton), Pulse-off-time (Toff) and Servo voltage (Sv) to study the kerf width (KW) and the material removal rate (MRR). This paper optimizes the results for obtaining maximum MRR with minimum KW using Grey relational theory.
引用
收藏
页码：5 / 8
页数：4
相关论文
共 50 条
  • [1] Effect of grey relational optimization of process parameters on surface and tribological characteristics of annealed AISI P20 tool steel machined using wire EDM
    Manisha Priyadarshini
    H. M. Vishwanatha
    Chandan Kumar Biswas
    Piyush Singhal
    Dharam Buddhi
    Ajit Behera
    [J]. International Journal on Interactive Design and Manufacturing (IJIDeM), 2024, 18 : 1 - 10
  • [2] Effect of grey relational optimization of process parameters on surface and tribological characteristics of annealed AISI P20 tool steel machined using wire EDM
    Priyadarshini, Manisha
    Vishwanatha, H. M.
    Biswas, Chandan Kumar
    Singhal, Piyush
    Buddhi, Dharam
    Behera, Ajit
    [J]. INTERNATIONAL JOURNAL OF INTERACTIVE DESIGN AND MANUFACTURING - IJIDEM, 2024, 18 (01): : 1 - 10
  • [3] Grey-Taguchi Optimization of Near Dry EDM Process Parameters on the Surface Roughness
    Khundrakpam, Nimo Singh
    Brar, Gurinder Singh
    Deepak, Dharmpal
    [J]. MATERIALS TODAY-PROCEEDINGS, 2018, 5 (02) : 4445 - 4451
  • [4] Optimization of machining parameters of Wire-EDM based on Grey relational and statistical analyses
    Huang, JT
    Liao, YS
    [J]. INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH, 2003, 41 (08) : 1707 - 1720
  • [5] Optimization and analysis of machining parameters by EDM on the surface roughness of AISI P20 steel
    Rossetto, Artur da Silva
    Haupt, William
    Consalter, Luiz Airton
    [J]. MATERIA-RIO DE JANEIRO, 2022, 27 (03):
  • [6] Wire Electro Discharge Machining of P20 Tool Steel
    Priyadarshini, Manisha
    Biswas, Chandan Kumar
    Behera, Ajit
    [J]. MATERIALS TODAY-PROCEEDINGS, 2018, 5 (11) : 25519 - 25523
  • [7] Analysis of EDM Process Parameters on Inconel 718 Using the Grey-Taguchi and Topsis Methods
    Yuvaraj, Thangavel
    Suresh, Paramasivam
    [J]. STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERING, 2019, 65 (10): : 557 - 564
  • [8] Optimization of Cutting Parameters in Drilling AISI P20 Die Mold Steel with Taguchi and GRA Methods
    Kayir, Yunus
    Suzgunol, Mehmet
    [J]. GAZI UNIVERSITY JOURNAL OF SCIENCE, 2018, 31 (03): : 898 - 910
  • [9] Optimization of Parameters in CNC milling of P20 steel using Response Surface methodology and Taguchi Method
    Vardhan, M. Vishnu
    Sankaraiah, G.
    Yohan, M.
    Rao, H. Jeevan
    [J]. MATERIALS TODAY-PROCEEDINGS, 2017, 4 (08) : 9163 - 9169
  • [10] On the Experimental Study of Electric Discharge Machining (EDM) of P20 Type Tool Steel
    Dadvandipour, Samad
    [J]. IEEE 11TH INTERNATIONAL SYMPOSIUM ON APPLIED MACHINE INTELLIGENCE AND INFORMATICS (SAMI 2013), 2013, : 245 - 248
12345