Prognosis of fatigue and impact induced damage in concrete using embedded piezo-transducers

被引:37
|
作者
Dixit, Anjaneya [1 ,2 ,3 ]
Bhalla, Suresh [2 ]
机构
[1] Natl Univ Singapore, Dept Civil & Environm Engn, Singapore, Singapore
[2] Indian Inst Technol Delhi, Dept Civil Engn, New Delhi 110016, India
[3] NUS, Singapore, Singapore
关键词
Structural health monitoring (SHM); Electra-mechanical impedance (EMI) technique; Concrete vibration sensor (CVS); Impact; Fatigue; Lead-zirconate-titanate (PZT); Residual life; ELECTROMECHANICAL IMPEDANCE TECHNIQUE; PARAMETERS; DIAGNOSIS; SENSORS; JOINTS;
D O I
10.1016/j.sna.2018.03.005
中图分类号
TM [电工技术]; TN [电子技术、通信技术];
学科分类号
0808 ; 0809 ;
摘要
Concrete structures are often subjected to a wide array of load conditions, such as fatigue and impact, and the consequent damages. Recently, smart materials, in particular the piezoelectric materials, have received high attention from the point of view of structural health monitoring (SHM). In this connection, the electro-mechanical impedance (EMI) is one of the latest and most effective techniques. The technique harnesses the piezoelectric property of lead-zirconate-titanate (PZT) patches to sense any incipient damage. In the research covered in the paper, embedded PZT patches are employed to monitor the accumulating damage in plain cement concrete subjected to fatigue and impact type loadings. Concrete specimens (150 mm cubes and 100(sic) x 200 mm cylinders) of grade M-25 are cast with embedded concrete vibration sensors (CVS). The impact loading is simulated by a free falling iron-ball of mass 5 kg dropped from variable heights of 2 m, 2.5 m and 3 m above the top surface of the test cubes. For fatigue tests, a 4000 kN cyclic compression testing machine is used to apply the fatigue load in a sinusoidal form. The admittance signatures from the embedded PZT patches for impact and fatigue tests are acquired using an LCR meter. These signatures are used to determine the PZT-identified equivalent system properties (damping, stiffness and mass) of the specimens at varying damage states. For impact tests, strain history during the impact process is acquired in addition to the admittance signatures. The results for impact tests show an increase in the maximum strain induced in the patch with the number of impacts, while the equivalent damping computed from the admittance signature is found to decrease with increasing damage. For fatigue tests, the equivalent damping is again found to decrease with increasing damage, finally undergoing a phenomenal increase near the failure. Based on these measurements, separate relationships have been developed for impact and fatigue induced damages linking the PZT-identified damping with remaining life. (C) 2018 Elsevier B.V. All rights reserved.
引用
收藏
页码:116 / 131
页数:16
相关论文
共 50 条
  • [1] Prognosis of low-strain fatigue induced damage in reinforced concrete structures using embedded piezo-transducers
    Bhalla, Suresh
    Kaur, Naveet
    [J]. INTERNATIONAL JOURNAL OF FATIGUE, 2018, 113 : 98 - 112
  • [2] Condition monitoring of bones using piezo-transducers
    S. Bhalla
    R. Suresh
    [J]. Meccanica, 2013, 48 : 2233 - 2244
  • [3] Structural impedance based damage diagnosis by piezo-transducers
    Bhalla, S
    Soh, CK
    [J]. EARTHQUAKE ENGINEERING & STRUCTURAL DYNAMICS, 2003, 32 (12): : 1897 - 1916
  • [4] Condition monitoring of bones using piezo-transducers
    Bhalla, S.
    Suresh, R.
    [J]. MECCANICA, 2013, 48 (09) : 2233 - 2244
  • [5] Identifying damage location with admittance signatures of smart piezo-transducers
    Naidu, ASK
    Soh, CK
    [J]. JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES, 2004, 15 (08) : 627 - 642
  • [6] A COST-EFFECTIVE APPROACH FOR TRAFFIC MONITORING USING PIEZO-TRANSDUCERS
    Bhalla, S.
    Deb, S. K.
    [J]. EXPERIMENTAL TECHNIQUES, 2011, 35 (05) : 30 - 34
  • [7] A cost-effective approach for traffic monitoring using piezo-transducers
    S. Bhalla
    S. K. Deb
    [J]. Experimental Techniques, 2011, 35 : 30 - 34
  • [8] Vibration-based pre-emptive detection of plate buckling using piezo-transducers
    Sumedha Moharana
    Suresh Bhalla
    Sarvottam Munjwani
    [J]. Innovative Infrastructure Solutions, 2022, 7
  • [9] Vibration-based pre-emptive detection of plate buckling using piezo-transducers
    Moharana, Sumedha
    Bhalla, Suresh
    Munjwani, Sarvottam
    [J]. INNOVATIVE INFRASTRUCTURE SOLUTIONS, 2022, 7 (03)
  • [10] Damage assessment of tensegrity structures using piezo transducers
    Bhalla, S.
    Panigrahi, R.
    Gupta, A.
    [J]. MECCANICA, 2013, 48 (06) : 1465 - 1478