Influence of deformation on the Burgers orientation relationship between the α and β phases in Ti-5Al-5Mo-5V-1Cr-1Fe

被引：68
|
作者：
Klimova, M. [1 ]
Zherebtsov, S. [1 ]
Salishchev, G. [1 ]
Semiatin, S. L. [2 ]
机构：
[1] Belgorod State Univ, Belgorod 308015, Russia
[2] Air Force Res Lab, Mat & Mfg Directorate, AFRL RXCM, Wright Patterson AFB, OH 45433 USA
来源：
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | 2015年 / 645卷
关键词：
Titanium alloys; Orientation relationships; Interfaces; EBSD; TI-6AL-4V ALLOY; MICROSTRUCTURE; WORKING; HOT;
D O I：
10.1016/j.msea.2015.08.008
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
The evolution of microstructure in Ti-5Al-5Mo-5V-1Cr-1Fe with an initial lamellar microstructure during compression to a true strain 1.2 at 800 degrees C was established via EBSD analysis. The principal features comprised recrystallization of the beta matrix and fragmentation/spheroidization of alpha lamellae. Angular deviations from the Burgers orientation relation (OR) and the kinetics of the spheroidization of lamellar microstructure as a function of strain were quantified. The influence of the deviation from the OR on spheroidization kinetics of the lamellar structure was interpreted. (C) 2015 Elsevier B.V. All rights reserved.
引用
收藏
页码：292 / 297
页数：6
相关论文
共 50 条
  • [1] Deformation behavior in the isothermal compression of Ti-5Al-5Mo-5V-1Cr-1Fe alloy
    Liu, S. F.
    Li, M. Q.
    Luo, J.
    Yang, Z.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2014, 589 : 15 - 22
  • [2] Research on hot deformation behavior of Ti-5Al-5Mo-5V-1Cr-1Fe alloy
    Qu, F. S.
    Zhou, Y. H.
    Zhang, L. Y.
    Wang, Z. H.
    Zhou, J.
    MATERIALS & DESIGN, 2015, 69 : 153 - 162
  • [3] Ti-5Al-5Mo-5V-1Cr-1Fe钛合金简介
    魏寿庸
    祝瀑
    王韦琪
    钛工业进展, 1998, (04) : 8 - 13
  • [4] Dynamic shear deformation and failure of Ti-5Al-5Mo-5V-1Cr-1Fe titanium alloy
    Ran, Chun
    Chen, Pengwan
    Li, Ling
    Zhang, Wangfeng
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2017, 694 : 41 - 47
  • [5] Dynamic Shear Deformation and Failure of Ti-6Al-4V and Ti-5Al-5Mo-5V-1Cr-1Fe Alloys
    Ran, Chun
    Chen, Pengwan
    MATERIALS, 2018, 11 (01)
  • [6] Dynamic recrystallization behavior of Ti-5Al-5Mo-5V-1Cr-1Fe alloy
    Liang, Houquan
    Guo, Hongzhen
    Ning, Yongquan
    Peng, Xiaona
    Qin, Chun
    Shi, Zhifeng
    Nan, Yang
    MATERIALS & DESIGN, 2014, 63 : 798 - 804
  • [7] Milling Force Modeling for Ti-5Al-5Mo-5V-1Cr-1Fe Alloy
    Zhang, Guoliang
    Ming, Weiwei
    Chen, Ming
    Han, Bing
    Rong, Bin
    MACHINING AND ADVANCED MANUFACTURING TECHNOLOGY X, 2010, 431-432 : 539 - 542
  • [8] Deformation behaviors of a hot rolled near-β Ti-5Al-5Mo-5V-1Cr-1Fe alloy
    Li, Yanghuanzi
    Ou, Xiaoqin
    Ni, Song
    Song, Min
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2019, 742 : 390 - 399
  • [9] Relationship between lamellar α evolution and flow behavior during isothermal deformation of Ti-5Al-5Mo-5V-1Cr-1Fe near β titanium alloy
    Li, Chao
    Zhang, Xiao-yong
    Zhou, Ke-chao
    Peng, Chao-qun
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2012, 558 : 668 - 674
  • [10] Microstructural evolution during aging of Ti-5Al-5Mo-5V-1Cr-1Fe alloy
    Zhang Shang-zhou
    Liu Zi-quan
    Wang Guang-dong
    Chen Li-qing
    Liu Xiang-hua
    Yang Rui
    JOURNAL OF CENTRAL SOUTH UNIVERSITY OF TECHNOLOGY, 2009, 16 (03): : 354 - 359
12345