OXIDATION RESISTANCE AND THERMAL STABILITY OF TI-AL-SI ALLOYS PRODUCED BY REACTIVE SINTERING

被引：0
|
作者：
Novak, Pavel [1 ]
Prusa, Filip [1 ]
Serak, Jan [1 ]
Vojtech, Dalibor [1 ]
Michalcova, Alena [1 ]
机构：
[1] Inst Chem Technol, Dept Met & Corros Engn, CR-16628 Prague 6, Czech Republic
来源：
METAL 2009, CONFERENCE PROCEEDINGS | 2009年
关键词：
titanium aluminide; titanium silicide; reactive sintering; powder metallurgy; oxidation resistance; thermal stability; TITANIUM;
D O I：
暂无
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
Alloys formed by Ti-Al intermediary phases have low density and very good high-temperature oxidation resistance. Further improvement of high-temperature behaviour can be achieved by a suitable addition of silicon. In this work, Ti-Al-Si alloys containing 10 - 20 wt. % of both silicon and aluminium produced by a reactive sintering technology were tested. Oxidation tests were carried out at 800 - 10000 degrees C in air. The oxidation rate was determined from weight gains caused by oxide formation. Microstructure and phase composition of the oxide layers were studied. Microstructure and hardness changes after various annealing durations were described.
引用
收藏
页码：233 / 237
页数：5
相关论文
共 50 条
  • [1] Preparation of Ti-Al-Si alloys by reactive sintering
    Novak, Pavel
    Michalcova, Alena
    Serak, Jan
    Vojtech, Dalibor
    Fabian, Tomas
    Randakova, Simona
    Prusa, Filip
    Knotek, Vitezslav
    Novak, Michal
    JOURNAL OF ALLOYS AND COMPOUNDS, 2009, 470 (1-2) : 123 - 126
  • [2] High-temperature behaviour of Ti-Al-Si alloys produced by reactive sintering
    Novak, Pavel
    Prusa, Filip
    Serak, Jan
    Vojtech, Dalibor
    Michalcova, Alena
    JOURNAL OF ALLOYS AND COMPOUNDS, 2010, 504 (02) : 320 - 324
  • [3] Synthesis of Intermediary Phases in Ti-Al-Si System by Reactive Sintering
    Novak, Pavel
    Vojtech, Dalibor
    Serak, Jan
    Kubasek, Jiri
    Prusa, Filip
    Knotek, Vitezslav
    Michalcova, Alena
    Novak, Michal
    CHEMICKE LISTY, 2009, 103 (12): : 1022 - 1026
  • [4] Properties Comparison of Ti-Al-Si Alloys Produced by Various Metallurgy Methods
    Knaislova, Anna
    Novak, Pavel
    Kopecek, Jaromir
    Prusa, Filip
    MATERIALS, 2019, 12 (19)
  • [5] Combination of reaction synthesis and Spark Plasma Sintering in production of Ti-Al-Si alloys
    Knaislova, A.
    Novak, P.
    Cabibbo, M.
    Prusa, F.
    Paoletti, C.
    Jaworska, L.
    Vojtech, D.
    JOURNAL OF ALLOYS AND COMPOUNDS, 2018, 752 : 317 - 326
  • [6] Mechanical alloying characteristics and thermal stability of Ti-Al-Si and Ti-Al-Si-C powders
    Vyas, A.
    Rao, K. P.
    Prasad, Y. V. R. K.
    JOURNAL OF ALLOYS AND COMPOUNDS, 2009, 475 (1-2) : 252 - 260
  • [7] Mechanism and kinetics of the intermediary phase formation in Ti-Al and Ti-Al-Si systems during reactive sintering
    Novak, Pavel
    Kubasek, Jiri
    Serak, Jan
    Vojtech, Dalibor
    Michalcova, Alena
    INTERNATIONAL JOURNAL OF MATERIALS RESEARCH, 2009, 100 (03) : 353 - 355
  • [8] Microstructure and super oxidation resistance of the network structured Ti-Al-Si coating
    Li, X. T.
    Huang, L. J.
    Jiang, S.
    Gao, Y. N.
    An, Q.
    Wang, S.
    Zhang, R.
    Geng, L.
    JOURNAL OF ALLOYS AND COMPOUNDS, 2019, 807
  • [9] Structure and Properties of Cast Ti-Al-Si Alloys
    Knaislova, Anna
    Novak, Pavel
    Linhart, Jiri
    Szurman, Ivo
    Skotnicova, Katerina
    Jurica, Jan
    Cegan, Tomas
    MATERIALS, 2021, 14 (04) : 1 - 15
  • [10] High-temperature behaviour of Ti-Al-Si alloys prepared by spark plasma sintering
    Knaislová, Anna
    Šimunková, Vendula
    Novák, Pavel
    Pruša, Filip
    Manufacturing Technology, 2017, 17 (05): : 733 - 738
12345