Heterogeneity of microstructure and mechanical properties of friction stir welded joints of Al-Zn-Mg alloy AA7039

被引：11

作者：

Sharma, Chaitanya ^{[1
]}

Dwivedi, Dheerendra Kumar ^{[1
]}

Kumar, Pradeep ^{[1
]}

机构：

[1] Indian Inst Technol, Mech & Ind Engn Dept, Roorkee 247667, Uttar Pradesh, India

来源：

INTERNATIONAL CONFERENCE ON DESIGN AND MANUFACTURING (ICONDM2013) | 2013年 / 64卷

关键词：

Friction stir welding; heterogeneity; microstructure; mechanical properties; fracture; WELDING PARAMETERS; GRAIN-GROWTH; ALUMINUM;

D O I：

10.1016/j.proeng.2013.09.220

中图分类号：

TM [电工技术]; TN [电子技术、通信技术];

学科分类号：

0808 ; 0809 ;

摘要：

Al-Zn-Mg aluminium alloy AA7039 was friction stir welded in order to investigate the influence of structural heterogeneity on mechanical properties of welded joints. Quality and mechanical properties of the developed weld joints were assessed by conducting bend, tensile and microhardness tests. Optical and scanning electron microscopy was used to analyze the microstructure and fracture surfaces respectively. It was found that joints were heterogeneous as different layers of joint exhibited significant heterogeneity in respect of microstructure and mechanical properties. Weld nugget grain size was found to decrease from top to bottom. Top layer of joint was strongest while middle layer was weakest. Weight % of Zn and Mg decreased from top to bottom layer of the joint. Mode of fracture was also found to be different for different layers of joint.

引用

页码：1384 / 1394

页数：11

共 50 条

[1] Effect of post weld heat treatments on microstructure and mechanical properties of friction stir welded joints of Al-Zn-Mg alloy AA7039
Sharma, Chaitanya
Dwivedi, Dheerendra Kumar
Kumar, Pradeep
[J]. MATERIALS & DESIGN, 2013, 43 : 134 - 143
[2] Effect of welding parameters on microstructure and mechanical properties of friction stir welded joints of AA7039 aluminum alloy
Sharma, Chaitanya
Dwivedi, Dheerendra Kumar
Kumar, Pradeep
[J]. MATERIALS & DESIGN, 2012, 36 : 379 - 390
[3] Influence of pre-weld temper conditions of base metal on microstructure and mechanical properties of friction stir weld joints of Al-Zn-Mg alloy AA7039
Sharma, Chaitanya
Dwivedi, D. K.
Kumar, Pradeep
[J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2015, 620 : 107 - 119
[4] FRICTION STIR WELDING OF Al-Zn- Mg ALLOY AA7039
Sharma, Chaitanya
Dwivedi, D. K.
Kumar, P.
[J]. LIGHT METALS 2012, 2012, : 503 - 507
[5] Mechanical properties of friction stir welded armor grade Al-Zn-Mg alloy joints
Sharma, C.
Upadhyay, V.
Dwivedi, D. K.
Kumar, P.
[J]. TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2017, 27 (03) : 493 - 506
[6] The microstructure and mechanical properties of friction stir welded Al-Zn-Mg alloy in as welded and heat treated conditions
Singh, R. K. R.
Sharma, Chaitanya
Dwivedi, D. K.
Mehta, N. K.
Kumar, P.
[J]. MATERIALS & DESIGN, 2011, 32 (02) : 682 - 687
[7] Evolution of Residual Stresses in Friction Stir Welded Joints of AA7039
Chauhan G.
Sahu M.
Prasad P.
Bhattacharya S.
Ganguly S.
[J]. Journal of The Institution of Engineers (India): Series D, 2023, 104 (01) : 213 - 223
[8] Fatigue behavior of friction stir weld joints of Al-Zn-Mg alloy AA7039 developed using base metal in different temper condition
Sharma, Chaitanya
Dwivedi, Dheerendra Kumar
Kumar, Pradeep
[J]. MATERIALS & DESIGN, 2014, 64 : 334 - 344
[9] INFLUENCES OF FRICTION STIR WELDING ON THE MICROSTRUCTURE, MECHANICAL AND CORROSION BEHAVIOUR OF AL-ZN-MG ALUMINIUM ALLOY 7039
Sharma, C.
Dwivedi, D. K.
Kumar, P.
[J]. ENGINEERING REVIEW, 2015, 35 (03) : 267 - 274
[10] Comparison of RSM with ANN in predicting tensile strength of friction stir welded AA7039 aluminium alloy joints
A. K. LAKSHMINARAYANA N
V. BALASUBRAMANIAN
[J]. Transactions of Nonferrous Metals Society of China, 2009, 19 (01) : 9 - 18

← 1 2 3 4 5 →