High quality flow boiling heat transfer and pressure drop in microgap pin fin arrays

被引：64

作者：

Reeser, A. ^{[1
]}

Bar-Cohen, A. ^{[1
]}

Hetsroni, G. ^{[2
]}

机构：

[1] Univ Maryland, Dept Mech Engn, College Pk, MD 20742 USA

[2] Technion Israel Inst Technol, Dept Mech Engn, IL-32000 Haifa, Israel

来源：

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER | 2014年 / 78卷

关键词：

Two-phase; Flow boiling; Micro pin fins; High vapor quality; Staggered; In-line; PREDICTION;

D O I：

10.1016/j.ijheatmasstransfer.2014.05.021

中图分类号：

O414.1 [热力学];

学科分类号：

摘要：

We investigated two phase heat transfer in staggered and inline micro pin fin arrays, using deionized water and HFE-7200 as working fluids with exit qualities up to 90%. The inline and staggered arrays were wire EDM fabricated to have equivalent pin fin width of 153 mu m and height of 305 mu m on a heated base area of 0.96 cm width by 2.88 cm length. Mass fluxes ranged from 200 to 600 kg/m(2) s for HFE-7200 and 400 to 1300 kg/m(2) s for water. Base heat fluxes ranged from 27 to 118 W/cm(2) for water, and 1 to 36 W/cm(2) for HFE-7200. Average heat transfer coefficient and pressure drop data were obtained and successfully correlated to 3% MAE for water heat transfer coefficient, 10-13% MAE for HFE-7200 heat transfer coefficient, and 15-30% MAE for pressure drop in these pin fin arrays. (c) 2014 Elsevier Ltd. All rights reserved.

引用

页码：974 / 985

页数：12

共 50 条

[1] Flow boiling heat transfer and pressure drop characteristics in expanding silicon microgap heat sink
Tamanna, Alam
Lee, Poh Seng
[J]. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2015, 82 : 1 - 15
[2] Flow boiling heat transfer and pressure drop in stepped fin microchannels
Balasubramanian, K.
Lee, P. S.
Teo, C. J.
Chou, S. K.
[J]. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2013, 67 : 234 - 252
[3] TWO PHASE PRESSURE DROP AND BOILING HEAT TRANSFER IN MICRO PIN FIN CHANNEL
Jung, Ki Moon
Lee, Hee Joon
[J]. PROCEEDINGS OF THE ASME 14TH INTERNATIONAL CONFERENCE ON NANOCHANNELS, MICROCHANNELS, AND MINICHANNELS, 2016, 2016,
[4] Heat Transfer and Pressure Drop Measurements in High Solidity Pin Fin Cooling Arrays With Incremental Replenishment
Busche, Mitch L.
Moualeu, Leolein P.
Chowdhury, Nafiz
Tang, Clement
Ames, Forrest E.
[J]. JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME, 2013, 135 (04):
[5] HEAT TRANSFER AND PRESSURE DROP MEASUREMENTS IN HIGH SOLIDITY PIN FIN COOLING ARRAYS WITH INCREMENTAL REPLENISHMENT
Busche, M. L.
Moualeu, L. P.
Chowdhury, N.
Tang, C.
Ames, F. E.
[J]. PROCEEDINGS OF THE ASME TURBO EXPO 2012, VOL 4, PTS A AND B, 2012, : 517 - 525
[6] Experimental study on the heat transfer and pressure drop of a cross-flow heat exchanger with different pin–fin arrays
Isak Kotcioglu
Sinan Caliskan
Senol Baskaya
[J]. Heat and Mass Transfer, 2011, 47
[7] Experimental investigation of local flow boiling heat transfer and pressure drop characteristics in microgap channel
Alam, Tamanna
Lee, Poh Seng
Yap, Christopher R.
Jin, Liwen
[J]. INTERNATIONAL JOURNAL OF MULTIPHASE FLOW, 2012, 42 : 164 - 174
[8] Experimental study on the heat transfer and pressure drop of a cross-flow heat exchanger with different pin-fin arrays
Kotcioglu, Isak
Caliskan, Sinan
Baskaya, Senol
[J]. HEAT AND MASS TRANSFER, 2011, 47 (09) : 1133 - 1142
[9] An investigation into flow boiling heat transfer and pressure drop in a pin-finned heat sink
McNeil, D. A.
Raeisi, A. H.
Kew, P. A.
Hamed, R. S.
[J]. INTERNATIONAL JOURNAL OF MULTIPHASE FLOW, 2014, 67 : 65 - 84
[10] COMPARISON OF PRESSURE DROP AND ENDWALL HEAT TRANSFER MEASUREMENTS TO FLOW VISUALIZATION TESTING OF SOLID AND POROUS PIN FIN ARRAYS
Pent, Jared M.
Kapat, Jay S.
Ricklick, Mark
[J]. IMECE 2009: PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, VOL 9, PTS A-C, 2010, : 2101 - 2111

← 1 2 3 4 5 →