A device for testing tubular specimens by pulsed internal pressure

被引：0
|
作者：
Loshmanov, LP
Rudnev, VD
机构：
来源：
INDUSTRIAL LABORATORY | 1996年 / 62卷 / 01期
关键词：
D O I：
暂无
中图分类号：
TH7 [仪器、仪表];
学科分类号：
0804 ; 080401 ; 081102 ;
摘要：
A device is described for testing tubes by internal pressure at strain rates of 10(2) - 5 x 10(3) sec(-1); using this device, the circumferential yield strength and the failure pressure of materials can be determined. As an example, the loading oscillogram of a specimen made of Zr - 1% Nb alloy is given. At a strain rate of 7.8 x 10(2) sec(-1) the circumferential yield strength of the material tested was found to be 540 MPa.
引用
收藏
页码：50 / 51
页数：2
相关论文
共 50 条
  • [1] A DEVICE FOR TESTING TUBULAR SPECIMENS
    VAZHENTSEV, YG
    [J]. INDUSTRIAL LABORATORY, 1993, 59 (06): : 626 - 627
  • [2] DEVICE FOR TESTING TUBULAR SPECIMENS AT HIGH TEMPERATURES UNDER COMBINED ACTION OF INTERNAL PRESSURE AND AXIAL LOAD
    POLINOVSKII, LA
    TOMILOV, FK
    [J]. INDUSTRIAL LABORATORY, 1971, 37 (05): : 791 - +
  • [3] DEVICE FOR TESTING TUBULAR TESTPIECES BY INTERNAL PRESSURE WITH AXIAL FORCE
    MONOSHKO.AN
    SVETLAKO.VA
    PASHKOV, YI
    PYKHOV, SI
    [J]. INDUSTRIAL LABORATORY, 1971, 37 (08): : 1276 - &
  • [4] INFLUENCE OF THE EDGE EFFECT IN TESTING TUBULAR SPECIMENS BY INTERNAL HYDROSTATIC-PRESSURE
    DOBROVOLSKII, IG
    SHLYAKHOVOI, VS
    [J]. INDUSTRIAL LABORATORY, 1984, 50 (06): : 606 - 609
  • [5] DEVICE FOR HERMETIZATION IN TESTING TUBULAR SAMPLES UNDER INTERNAL-PRESSURE
    SMIRNOV, AI
    PERSHIN, AS
    [J]. ZAVODSKAYA LABORATORIYA, 1974, 40 (03): : 337 - 338
  • [6] Device for applying internal pressure to cylindrical specimens
    Brown, CU
    Kish, VL
    Vanscoy, WM
    Norman, TL
    Blaha, JD
    [J]. EXPERIMENTAL TECHNIQUES, 2000, 24 (04) : 19 - 21
  • [7] Device for applying internal pressure to cylindrical specimens
    C. U. Brown
    V. L. Kish
    W. M. Vanscoy
    T. L. Norman
    J. D. Blaha
    [J]. Experimental Techniques, 2000, 24 : 19 - 21
  • [8] METHOD OF TESTING THIN-WALL TUBULAR SPECIMENS IN AN IMPACT TESTER UNDER INTERNAL-PRESSURE
    MARININ, LL
    MARKOCHEV, VM
    BOBRINSKII, AP
    [J]. INDUSTRIAL LABORATORY, 1985, 51 (02): : 166 - 168
  • [9] DEVICE FOR FASTENING TUBULAR SPECIMENS (EXCHANGE OF EXPERIENCE)
    VOROBEV, VM
    [J]. INDUSTRIAL LABORATORY, 1990, 56 (01): : 84 - 86
  • [10] DEVICE FOR TESTING TUBULAR PRESSURE-GAUGE SPRINGS FOR CREEP (EXCHANGE OF EXPERIENCE)
    BUTKEVICH, LM
    GORBACHEV, FY
    GRIDNEV, MP
    MAKOGON, MB
    PYATNICHUK, GK
    [J]. INDUSTRIAL LABORATORY, 1963, 29 (12): : 1671 - 1671
12345