Ultrahigh Gauge Factor in Graphene/MoS2 Heterojunction Field Effect Transistor with Variable Schottky Barrier

Piezoelectricity of transition metal dichalcogenides (TMDs) under mechanical strain has been theoretically and experimentally studied. Powerful strain sensors using Schottky barrier variation in TMD/metal junctions as a result of the strain-induced lattice distortion and associated ion-charge polarization were demonstrated. However, the nearly fixed work function of metal electrodes limits the variation range of a Schottky barrier. We demonstrate a highly sensitive strain sensor using a variable Schottky barrier in a MoS2/graphene heterostructure field effect transistor (FET). The low density of states near the Dirac point in graphene allows large modulation of the graphene Fermi level and corresponding Schottky barrier in a MoS2/graphene junction by strain-induced polarized charges of MoS2. Our theoretical simulations and temperature-dependent electrical measurements show that the Schottky barrier change is maximized by placing the Fermi level of the graphene at the charge neutral (Dirac) point by applying gate voltage. As a result, the maximum Schottky barrier change (Delta Phi(SB)) and corresponding current change ratio under 0.17% strain reach 118 meV and 978, respectively, resulting in an ultrahigh gauge factor of 575 294, which is approximately 500 times higher than that of metal/TMD junction strain sensors (1160) and 140 times higher than the conventional strain sensors (4036). The ultrahigh sensitivity of graphene/MoS2 heterostructure FETs can be developed for next-generation electronic and mechanical-electronic devices.