Effect of Machining Parameters on Tool Wear in Hard Turning of AISI D3 Steel

被引：30

作者：

Bh, Varaprasad. ^{[1
]}

Ch, Srinivasa Rao. ^{[2
]}

Vinay, P. V. ^{[1
]}

机构：

[1] GVP Coll Degree & PG Courses, Tech Campus, Visakhapatnam, Andhra Pradesh, India

[2] Andhra Univ, Coll Engn A, Dept Mech Engn, Visakhapatnam, Andhra Pradesh, India

来源：

12TH GLOBAL CONGRESS ON MANUFACTURING AND MANAGEMENT (GCMM - 2014) | 2014年 / 97卷

关键词：

Hard turning; Tool Flank Wear; AISI D3; RSM; SURFACE-ROUGHNESS;

D O I：

10.1016/j.proeng.2014.12.257

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Present day metal cutting industry has to meet the challenges of quality and productivity of the machined parts during turning economically. In the present work, an attempt has been made to develop a model and predict tool flank wear of hard turned AISI D3 hardened steel using Response Surface Methodology (RSM). The combined effects of cutting speed, feed rate and depth of cut are investigated using contour plots and surface plots. RSM based Central Composite Design (CCD) is applied as an experimental design. Al2O3/TiC mixed ceramic tool with corner radius 0.8 mm is employed to accomplish 20 tests with six centre points. The adequacy of the developed models is checked using Analysis of Variance (ANOVA). Main and interaction plots are drawn to study the effect of process parameters on output responses. (C) 2014 Published by Elseiver Ltd.

引用

页码：338 / 345

页数：8

共 50 条

[1] Optimization of machining parameters during cryogenic turning of AISI D3 steel
Anurag Sharma
R C Singh
Ranganath M Singari
[J]. Sādhanā, 2020, 45
[2] Optimization of machining parameters during cryogenic turning of AISI D3 steel
Sharma, Anurag
Singh, R. C.
Singari, Ranganath M.
[J]. SADHANA-ACADEMY PROCEEDINGS IN ENGINEERING SCIENCES, 2020, 45 (01):
[3] Wear behaviour of CBN tool when turning hardened AISI D3 steel
Bouchelaghem, H.
Yallese, M. A.
Amirat, A.
Belhadi, S.
[J]. MECHANIKA, 2007, (03): : 57 - 65
[4] Statistical Model for Surface Roughness in Hard Turning of AISI D3 Steel
Bhemuni, Varaprasad
Chalamalasetti, Srinivasa Rao
[J]. JORDAN JOURNAL OF MECHANICAL AND INDUSTRIAL ENGINEERING, 2014, 8 (06): : 393 - 401
[5] Statistical model for surface roughness in hard turning of AISI D3 steel
[J]. Bhemuni, Varaprasad (varaprasad.bhimuni11@gmail.com), 1600, Hashemite University (08):
[6] Improvement of Surface Finish and Reduction of Tool Wear during Hard Turning of AISI D3 using Magnetorheological Damper
Girinath, B.
Mathew, A.
Babu, J.
Thanikachalam, J.
Bose, S. S.
[J]. JOURNAL OF SCIENTIFIC & INDUSTRIAL RESEARCH, 2018, 77 (01): : 35 - 40
[7] Optimizing flank wear and surface roughness during hard turning of AISI D3 steel by Taguchi and RSM methods
Dureja, J. S.
Singh, Rupinder
Bhatti, Manpreet S.
[J]. PRODUCTION AND MANUFACTURING RESEARCH-AN OPEN ACCESS JOURNAL, 2014, 2 (01): : 767 - 783
[8] Assessment and Comparison of Machining Performance in Rotary and Stationary Tool EDM for Machining AISI D3 Tool Steel
Dwivedi, Anand Prakash
Choudhury, Sounak Kumar
[J]. TRANSACTIONS ON ENGINEERING TECHNOLOGIES, 2016, : 95 - 109
[9] Investigations on Machining Performances and Tool Wear Surface Characterization During CNC Hard Turning of AISI 4140 Alloy Steel
Ghosh, Shuvajit
Mandal, Nirmal Kumar
Kar, Tuhin
[J]. JOURNAL OF ADVANCED MANUFACTURING SYSTEMS, 2021, 20 (04) : 683 - 703
[10] Effect of cutting edge radius on surface roughness and tool wear in hard turning of AISI 52100 steel
T. Zhao
J. M. Zhou
V. Bushlya
J. E. Ståhl
[J]. The International Journal of Advanced Manufacturing Technology, 2017, 91 : 3611 - 3618

← 1 2 3 4 5 →