Hardened steel. turning by means of modern CBN cutting tools

被引：9
|
作者：
Slusarczyk, Lukasz [1 ]
Struzikiewicz, Grzegorz [1 ]
机构：
[1] Cracow Univ Technol, PL-31864 Krakow, Poland
来源：
PRECISION MACHINING VII | 2014年 / 581卷
关键词：
turning; CBN cutting tools; surface roughness; Taguchi method; hardened steel; PARAMETERS;
D O I：
10.4028/www.scientific.net/KEM.581.188
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
The paper presents an analysis of the impact of cutting parameters such as cutting rate, feed rate, cutting depth and cutting tool material grade for surface roughness, the components of the total cutting force and chip classification. The turning process of 145Cr steel with a hardness of 55BRC with Wiper CBN type tools were analysed.
引用
收藏
页码：188 / 193
页数：6
相关论文
共 50 条
  • [1] Turning of interrupted and continuous hardened steel surfaces using ceramic and CBN cutting tools
    de Godoy, Vitor Augusto A.
    Diniz, Anselmo Eduardo
    [J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2011, 211 (06) : 1014 - 1025
  • [2] Comparison Research on the Machinability of Hardened Steel when Dry Turning with Ceramic and CBN Cutting Tools
    Tu, Chunjuan
    Guo, Xuhong
    Wang, Wei
    Wang, Chihong
    [J]. ADVANCES IN MECHATRONICS TECHNOLOGY, 2011, 43 : 573 - 577
  • [3] Machining hardened steel with ceramic-coated and uncoated CBN cutting tools
    Dawson, TG
    Kurfess, TR
    [J]. TRANSACTIONS OF THE NORTH AMERICAN MANUFACTURING RESEARCH INSTITUTE OF SME, VOL XXX, 2002, 2002, : 337 - 343
  • [4] The study of high speed turning of the harden mold steel by CBN cutting tools
    Lin, Wei-Shin
    Liang, Tun-Hao
    Huang, Po-Chun
    Huang, Tzu-Lun
    Wu, Hsin-Hsien
    [J]. Journal of the Chinese Society of Mechanical Engineers, Transactions of the Chinese Institute of Engineers, Series C/Chung-Kuo Chi Hsueh Kung Ch'eng Hsuebo Pao, 2005, 26 (04): : 643 - 648
  • [5] Precision milling of hardened steel with CBN tools
    Matras, Andrzej
    Zebala, Wojciech
    Kowalczyk, Robert
    [J]. PRECISION MACHINING VII, 2014, 581 : 182 - 187
  • [6] Machinability and Surface Quality Issues in Finish Turning of Hardened Steel with Coated Carbide and CBN Tools
    Dogra, Manu
    Sharma, Vishal S.
    [J]. MATERIALS AND MANUFACTURING PROCESSES, 2012, 27 (10) : 1110 - 1117
  • [7] Optimization of geometry parameters for ceramic cutting tools in intermittent turning of hardened steel
    Cui, Xiaobin
    Guo, Jingxia
    Zheng, Jianxin
    [J]. MATERIALS & DESIGN, 2016, 92 : 424 - 437
  • [8] Wear mechanism of cBN tool in cutting of hardened steel
    Egawa, Tsuneo
    Ichikizaki, Tetsuo
    Kuroda, Motofumi
    Hiasa, Yukio
    Tsukamoto, Hidehiko
    [J]. Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering, 1995, 61 (06): : 809 - 813
  • [9] The study of the influence of cutting conditions on machined surface roughness in turning hardened steels with cutting tools of cBN-based composite
    N. E. Stakhniv
    [J]. Journal of Superhard Materials, 2013, 35 : 166 - 174
  • [10] The study of the influence of cutting conditions on machined surface roughness in turning hardened steels with cutting tools of cBN-based composite
    Stakhniv, N. E.
    [J]. JOURNAL OF SUPERHARD MATERIALS, 2013, 35 (03) : 166 - 174
12345