Friction and wear properties of short carbon fiber reinforced aluminum matrix composites

被引：93
|
作者：
Liu Lei [1 ]
Li Weiwei [1 ]
Tang Yiping [1 ]
Shen Bin [1 ]
Hu Wenbin [1 ]
机构：
[1] Shanghai Jiao Tong Univ, State Key Lab Met Matrix Composites, Shanghai 200030, Peoples R China
来源：
WEAR | 2009年 / 266卷 / 7-8期
基金：
国家高技术研究发展计划(863计划); 中国国家自然科学基金;
关键词：
Al alloy; Composite; Short carbon fiber; Wear; INTERFACIAL MECHANICAL-PROPERTIES; BEHAVIOR; ALLOY;
D O I：
10.1016/j.wear.2008.08.009
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
The friction and wear properties of short carbon fibers (SCFs) reinforced aluminum matrix composite were studied. The influences of the fiber volume fraction, load applied, rotating speed, and wear mechanism were discussed. The results indicated that SCFs/Al composite had better tribological properties than Al alloy. The friction coefficient and wear mass loss decreased with the fiber volume fraction increased, but increased as the load and rotating speed increased, respectively. SCIF reduced direct contact between the matrix and counterpart and improved the wear resistance of SCFs/Al composite greatly. The wear displayed a linear evolution in all the range of load. Surfaces before and after wear tests were characterized using scanning electron microscopy (SEM) and energy-dispersive analysis of X-ray (EDAX) spectroscopy. (C) 2008 Elsevier B.V. All rights reserved.
引用
收藏
页码：733 / 738
页数：6
相关论文
共 50 条
  • [1] Friction and Wear Properties of Aluminum Matrix Composites Reinforced by Coated Carbon Fibers
    Deng Xiaoyan
    Zhang Guoheng
    Qiang Chengwen
    Cairang Zhuoma
    Wang Tong
    [J]. ADVANCES IN APPLIED MATERIALS AND ELECTRONICS ENGINEERING II, 2013, 684 : 342 - +
  • [2] Friction and wear properties of copper matrix composites reinforced with short carbon fibers
    Tang, Yiping
    Liu, Hezhou
    Zhao, Haijun
    Liu, Lei
    Wu, Yating
    [J]. MATERIALS & DESIGN, 2008, 29 (01) : 257 - 261
  • [3] Wear and mechanical properties of short carbon fiber reinforced copper matrix composites
    Yang, Lianwei
    Dong, Yun
    Wang, Ruijie
    [J]. ADVANCED MATERIALS AND COMPUTER SCIENCE, PTS 1-3, 2011, 474-476 : 1605 - +
  • [4] Friction and wear properties of carbon fiber reinforced polypropylene composites
    Li, Jian
    Cai, Chilan
    [J]. MATERIALS AND DESIGN, PTS 1-3, 2011, 284-286 : 2380 - 2383
  • [5] Friction and wear properties of UHMWPE composites reinforced with carbon fiber
    Xiong, DS
    [J]. MATERIALS LETTERS, 2005, 59 (2-3) : 175 - 179
  • [6] The effect of carbon fiber wear properties of carbon composites content on the friction and fiber reinforced polyimide
    Li, Jian
    Cheng, Xianhua
    [J]. JOURNAL OF APPLIED POLYMER SCIENCE, 2008, 107 (03) : 1737 - 1743
  • [7] The effect of carbon fiber content on the friction and wear properties of carbon fiber reinforced polyimide composites
    Li, Jian
    Cheng, Xianhua
    [J]. Journal of Applied Polymer Science, 1600, 107 (03): : 1737 - 1743
  • [8] Friction and Wear Properties of Polyimide Matrix Composites Reinforced with Short Basalt Fibers
    Zhang, Xinrui
    Pei, Xianqiang
    Wang, Qihua
    [J]. JOURNAL OF APPLIED POLYMER SCIENCE, 2009, 111 (06) : 2980 - 2985
  • [9] FRICTION AND WEAR OF FIBER-REINFORCED METAL MATRIX COMPOSITES
    SAKA, N
    SZETO, NK
    ERTURK, T
    [J]. WEAR, 1992, 157 (02) : 339 - 357
  • [10] The fabrication and properties of short carbon fiber reinforced copper matrix composites
    Li, Weiwei
    Liu, Lei
    Shen, Bin
    [J]. JOURNAL OF COMPOSITE MATERIALS, 2011, 45 (24) : 2567 - 2571
12345