Efficiency-optimised CVT hydraulic and clamping system

被引：0
|
作者：
Faust, H [1 ]
Homm, M [1 ]
Reuschel, M [1 ]
机构：
[1] VDI, Buhl, Germany
来源：
CVT 2002 CONGRESS | 2002年 / 1709卷
关键词：
D O I：
暂无
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
An important target of modern transmission technology is the reduction of fuel consumption. The AUDI multitronic(R) currently in production with the LuK CVT components: pulley sets, chain, hydraulic control unit with pump and damper sets a very good standard with regard to efficiency, fuel consumption and dynamic behaviour. Compared to conventional 5 speed automatic transmissions there is a fuel consumption advantage of 9 %, and the time for acceleration from 0 to 60 mph is improved by 1.3 s. These values are mainly influenced by the CVT components delivered by LuK as a system supplier. Further developments of the hydraulic control, in combination with new ideas for a slip controlled clamping, show a potential to reduce fuel consumption. The benefit of the described concept including the LuK chain amounts to 7 ... 10 % compared to conventional CVT technologies.
引用
收藏
页码：43 / 58
页数：16
相关论文
共 50 条
  • [1] Efficiency-optimised modulation technique of three-level NPC inverter
    Li, Ning
    Li, Wanting
    Zhang, Hui
    Yang, Ping
    JOURNAL OF ENGINEERING-JOE, 2019, (16): : 938 - 942
  • [2] Optimization of CVT Efficiency Based on Clamping Force Control
    Wu Guang-bin
    Lu Yan-hui
    Xu Xiao-wei
    IFAC PAPERSONLINE, 2018, 51 (31): : 898 - 903
  • [3] Sensor integration for a hydraulic clamping system
    Denkena, Berend
    Dahlmann, Dominik
    Kiesner, Johann
    2ND INTERNATIONAL CONFERENCE ON SYSTEM-INTEGRATED INTELLIGENCE: CHALLENGES FOR PRODUCT AND PRODUCTION ENGINEERING, 2014, 15 : 465 - 473
  • [4] Modelling, identification and experimental validation of CVT clamping force control system
    State Key Laboratory of Advanced Design and Manufacture for Vehicle Body, Hunan University, Changsha 410082, China
    不详
    Zhongguo Jixie Gongcheng, 2007, 19 (2291-2293):
  • [5] Hydraulic system simulation of CVT with fuzzy logic controllers
    Tian, JS
    Su, J
    2004 1ST INTERNATIONAL CONFERENCE ON POWER ELECTRONICS SYSTEMS AND APPLICATIONS PROCEEDINGS, 2004, : 136 - 141
  • [6] Design optimisation of a hydraulic clamping system by simulation
    Pinet, PJ
    Martin, HR
    PROCEEDINGS OF THE 47TH NATIONAL CONFERENCE ON FLUID POWER, VOL II, 1996, : 105 - 120
  • [7] Power matching control and simulation on hydraulic system of CVT
    Yang, Yang
    Qin, Datong
    Yang, Yalian
    Hu, Jianjun
    Wu, Guangdeng
    Zhongguo Jixie Gongcheng/China Mechanical Engineering, 2006, 17 (04): : 426 - 431
  • [8] REGENERATIVE AIR-HYDRAULIC CLAMPING SYSTEM
    ALLARD, GH
    MACHINE DESIGN, 1968, 40 (18) : 99 - &
  • [9] HYDRAULIC CLAMPING IS THE ANSWER
    不详
    MODERN MACHINE SHOP, 1984, 57 (05) : 116 - 116
  • [10] MECHANICAL OR HYDRAULIC CLAMPING
    HUBNER, R
    WERKSTATTSTECHNIK ZEITSCHRIFT FUR INDUSTRIELLE FERTIGUNG, 1983, 73 (11): : 705 - 706
12345