Dual-reflux pressure swing adsorption process is theoretically capable of completely separating binary feed gas mixtures into two pure species. The pressure of bed to which the binary gas mixture is fed and the type of gas utilized for pressure swing, results in different process cycle configurations, even if the majority of the previous studies of DR-PSA are restricted to two cycle configurations: that employ heavy gas for pressure swing and deliver feed to the bed operated at either high or low pressure. However, the comparative assessment and the optimal operating pressure ratio of these two process cycle configurations are not well-established. We previously reported an optimal design strategy (that identified a triangular operating zone, inside which, complete separation of binary gas mixtures can be achieved) for one such DR-PSA process cycle configuration. In this work, we report an optimal design strategy for another DR-PSA process cycle configuration: feed to low pressure bed and pressure swing using heavy gas. With respect to previous literature, the equilibrium theory based comprehensive tracking of the characteristic curves and shock transitions during constant and non-constant pressure steps of this specific cyclic process revealed distinct constraints, design parameter values and boundary conditions of the triangular operating zone. Additionally, an in-depth comparative assessment of the impact of process variables (adsorbent selectivity, feed gas composition and, operating pressure ratio) on the design parameters (optimal feed injection position and ratio of pure light reflux to feed rate) and a novel selection criterion is discussed for both of these cycle configurations in order to (i) facilitate the choice of appropriate cycle configuration and (ii) identify the optimal high to low operating pressure ratio range. (C) 2016 Elsevier B.V. All rights reserved.
机构:
State Key Laboratory of Chemical Engineering, Chemical Engineering Research Center, School of Chemical Engineering and Technology, TianjinState Key Laboratory of Chemical Engineering, Chemical Engineering Research Center, School of Chemical Engineering and Technology, Tianjin
Wang Y.
Tian C.
论文数: 0引用数: 0
h-index: 0
机构:
State Key Laboratory of Chemical Engineering, Chemical Engineering Research Center, School of Chemical Engineering and Technology, TianjinState Key Laboratory of Chemical Engineering, Chemical Engineering Research Center, School of Chemical Engineering and Technology, Tianjin
Tian C.
Ding Z.
论文数: 0引用数: 0
h-index: 0
机构:
State Key Laboratory of Chemical Engineering, Chemical Engineering Research Center, School of Chemical Engineering and Technology, TianjinState Key Laboratory of Chemical Engineering, Chemical Engineering Research Center, School of Chemical Engineering and Technology, Tianjin
Ding Z.
Tang Z.
论文数: 0引用数: 0
h-index: 0
机构:
State Key Laboratory of Chemical Engineering, Chemical Engineering Research Center, School of Chemical Engineering and Technology, TianjinState Key Laboratory of Chemical Engineering, Chemical Engineering Research Center, School of Chemical Engineering and Technology, Tianjin
Tang Z.
Zhang D.
论文数: 0引用数: 0
h-index: 0
机构:
State Key Laboratory of Chemical Engineering, Chemical Engineering Research Center, School of Chemical Engineering and Technology, TianjinState Key Laboratory of Chemical Engineering, Chemical Engineering Research Center, School of Chemical Engineering and Technology, Tianjin
机构:
Univ Teknol Malaysia UTM, Fac Chem & Energy Engn, Dept Chem Engn, Johor Baharu 81310, Johor, MalaysiaUniv Teknol Malaysia UTM, Fac Chem & Energy Engn, Dept Chem Engn, Johor Baharu 81310, Johor, Malaysia
Bahrun, Mohd Hardyianto Vai
Bono, Awang
论文数: 0引用数: 0
h-index: 0
机构:
GRISM Innovat Solut, Kota Kinabalu, Sabah, MalaysiaUniv Teknol Malaysia UTM, Fac Chem & Energy Engn, Dept Chem Engn, Johor Baharu 81310, Johor, Malaysia
Bono, Awang
Othman, Norasikin
论文数: 0引用数: 0
h-index: 0
机构:
Univ Teknol Malaysia UTM, Fac Chem & Energy Engn, Dept Chem Engn, Johor Baharu 81310, Johor, Malaysia
Univ Teknol Malaysia UTM, Ibnu Sina Inst Sci & Ind Res ISI SIR, Ctr Lipids Engn & Appl Res CLEAR, Johor Baharu 81310, Johor, MalaysiaUniv Teknol Malaysia UTM, Fac Chem & Energy Engn, Dept Chem Engn, Johor Baharu 81310, Johor, Malaysia
Othman, Norasikin
Zaini, Muhammad Abbas Ahmad
论文数: 0引用数: 0
h-index: 0
机构:
Univ Teknol Malaysia UTM, Fac Chem & Energy Engn, Dept Chem Engn, Johor Baharu 81310, Johor, Malaysia
Univ Teknol Malaysia UTM, Ibnu Sina Inst Sci & Ind Res ISI SIR, Ctr Lipids Engn & Appl Res CLEAR, Johor Baharu 81310, Johor, MalaysiaUniv Teknol Malaysia UTM, Fac Chem & Energy Engn, Dept Chem Engn, Johor Baharu 81310, Johor, Malaysia