Tool life of diamond inserts after laser assisted turning of cemented carbides

被引：2

作者：

Kieruj, Piotr ^{[1
]}

Kuklinski, Mateusz ^{[1
]}

机构：

[1] Poznan Univ Tech, Inst Mech Technol, Piotrowo 3, PL-60965 Poznan, Poland

来源：

8TH INTERNATIONAL CONFERENCE ON MANUFACTURING SCIENCE AND EDUCATION (MSE 2017) - TRENDS IN NEW INDUSTRIAL REVOLUTION | 2017年 / 121卷

关键词：

TUNGSTEN CARBIDE; COATINGS;

D O I：

10.1051/matecconf/201712103011

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The paper presents results and discussion on parameters influence on tool life when turning laser cladded cemented carbides under laser assisted machining (LAM) conditions. The layers are known as Technolase 30S. This material is widely recognized as hard-to-cut. The experimental investigation was carried out with diamond inserts. The laser power density, feed rate and laser scanning speed were analysed. Flank wear (VBc) indicator was measured and cutting tool life was calculated. It was proved that Technolase 30S can be machined with LAM technology. The laser enhanced turning is more efficient than conventional turning and grinding.

引用

页数：7

共 50 条

[1] RESIDUAL-STRESSES IN CEMENTED CARBIDES AFTER TURNING WITH DIAMOND TOOLS
KRAVCHENKO, BA
SOVIET ENGINEERING RESEARCH, 1981, 1 (12): : 48 - 49
[2] Performance and Wear Characteristics of Cutting Tool in Laser Ultrasonically Assisted Cutting of Cemented Carbides
硬質合金鐳射超聲輔助切削刀具性能及磨損特性
Zhang, Chang-Juan, 2018, Chinese Mechanical Engineering Society (39):
[3] Performance and Wear Characteristics of Cutting Tool in Laser Ultrasonically Assisted Cutting of Cemented Carbides
Zhang, Chang-Juan
Jiao, Feng
Niu, Ying
JOURNAL OF THE CHINESE SOCIETY OF MECHANICAL ENGINEERS, 2018, 39 (01): : 65 - 73
[4] Investigation of technology of depositing low surface roughness diamond thin films on cemented carbides inserts
Chen, M
Sun, FH
Zhang, ZM
Hu, DJ
PROGRESS OF MACHINING TECHNOLOGY: WITH SOME TOPICS IN ADVANCED MANUFACTURING TECHNOLOGY, 2000, : 89 - 95
[5] Precision tailoring of laser beam propagation in a single crystalline diamond tool for in situ laser-assisted diamond turning
Hu, Wangjie
Li, Zengqiang
Zhao, Xuesen
Sun, Tao
Zhang, Junjie
APPLIED OPTICS, 2024, 63 (01) : 93 - 103
[6] Cutting tool performance of laser coated diamond coating and diamond facing inserts
Gu, J
Tung, SC
Barber, G
TRIBOLOGY TRANSACTIONS, 2002, 45 (01) : 61 - 66
[7] Life time of cemented carbide inserts with Ni-Fe binder in steel turning
Toller, Lisa
Jacobson, Staffan
Norgren, Susanne
WEAR, 2017, 376 : 1822 - 1829
[8] Laser assisted diamond turning of silicon freeform surface
You, Kaiyuan
Liu, Guangyu
Wang, Wei
Fang, Fengzhou
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2023, 322
[9] WEAR BEHAVIOR AND TOOL LIFE OF MODIFIED WC-BASED CEMENTED CARBIDES
BHAUMIK, SK
UPADHYAYA, GS
VAIDYA, ML
MATERIALS CHARACTERIZATION, 1994, 32 (01) : 41 - 49
[10] Tool Wear Evaluation of Selected Inserts after Turning by Electron Microscopy
Nàprstkovà N.
Cais J.
Kraus P.
Van T.N.
Manufacturing Technology, 2016, 16 (05): : 74 - 75

← 1 2 3 4 5 →