Gear crack detection by adaptive amplitude and phase demodulation

被引:35
|
作者
Brie, D
Tomczak, M
Oehlmann, H
Richard, A
机构
[1] Ctr. de Rech. en Automat. de Nancy, CNRS URA 821, Univ. Henri Poincaré, Nancy 1, 54506 Vandoeuvre Cedex
关键词
D O I
10.1006/mssp.1996.0068
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
A new method for gear crack detection is presented. It consists of the coupling of adaptive demodulation with an abrupt change detector. The adaptive algorithm is intended to account for the slow variations of the signal. Two methods for this adaptive demodulation are proposed: a RLS approach based on a linear version of the signal model and a LMS approach which directly estimates the physical parameters (amplitude and phase) for each harmonic considered. Their respective advantages and disadvantages are discussed and the superiority over the Hilbert transform approach is shown. The crack detection is formulated as an abrupt change detection problem solved by the sequential monitoring of the prediction error. Its effectiveness is demonstrated through the application of the demodulation detection algorithm to gearbox under reliability tests. (C) 1997 Academic Press Limited
引用
收藏
页码:149 / 167
页数:19
相关论文
共 50 条
  • [1] Gear crack detection by adaptive amplitude and phase demodulation
    Universite Henri Poincare, Vandoeuvre, France
    Mech Syst Signal Process, 1 (149-167):
  • [2] Fault feature extraction of planetary carrier crack by amplitude and phase demodulation
    Wang D.-F.
    Guo Y.
    Wu X.
    Guo, Yu (kmgary@163.com), 1600, Nanjing University of Aeronautics an Astronautics (34): : 1085 - 1091
  • [3] Gear fault diagnosis based on amplitude and phase demodulation during run-up
    Li, Hui
    Zheng, Hai-Qi
    Yang, Shao-Pu
    Zhendong yu Chongji/Journal of Vibration and Shock, 2008, 27 (02): : 8 - 11
  • [4] Gear and bearing diagnostics using neural network-based amplitude and phase demodulation
    Larson, EC
    Wipf, DP
    Parker, BE
    CRITICAL LINK: DIAGNOSIS TO PROGNOSIS, 1997, : 511 - 521
  • [5] COMBINED PHASE AND AMPLITUDE DEMODULATION
    BUCY, RS
    MALLINCKRODT, AJ
    IEEE TRANSACTIONS ON AUTOMATIC CONTROL, 1982, 27 (02) : 476 - 478
  • [6] Research on the Comprehensive Demodulation of Gear Tooth Crack Early Fault
    CUI Lingli DING Fang GAO Lixin ZHANG Jianyu College of Mechanical Engineering and Applied Electronics TechnologyBeijing University of TechnologyAdvanced Manufacturing TechnologyThe Key Laboratory of Beijing MunicipalityBeijing China
    武汉理工大学学报, 2006, (S2) : 596 - 599
  • [7] Research on the comprehensive demodulation of gear tooth crack early fault
    Cui Lingli
    Ding Fang
    Gao Lixin
    Zhang Jianyu
    1st International Symposium on Digital Manufacture, Vols 1-3, 2006, : 596 - 599
  • [8] Research on the comprehensive demodulation of gear tooth crack early fault
    Key Laboratory of Beijing Municipality, College of Mechanical Engineering and Applied Electronics Technology, Beijing University of Technology, Advanced Manufacturing Technology, Beijing 100022, China
    Wuhan Ligong Daxue Xuebao, 2006, SUPPL. 1 (596-599):
  • [9] A comprehensive demodulation analysis of gear tooth crack early fault
    The Key Laboratory of Advanced Manufacturing Technology, College of Mechanical Engineering and Applied Electronics Technology, Beijing University of Technology, Beijing 100022, China
    不详
    Beijing Gongye Daxue Xuebao J. Beijing Univ. Technol., 2006, 8 (760-764):
  • [10] Demodulation of Gear Vibration Signals for Fault Detection
    Chen, Hanxin
    Zuo, Ming J.
    PROCEEDINGS OF 2009 8TH INTERNATIONAL CONFERENCE ON RELIABILITY, MAINTAINABILITY AND SAFETY, VOLS I AND II: HIGHLY RELIABLE, EASY TO MAINTAIN AND READY TO SUPPORT, 2009, : 826 - +