Laser cladding of turbine blades

被引：158
|
作者：
Shepeleva, L [1 ]
Medres, B
Kaplan, WD
Bamberger, M
Weisheit, A
机构：
[1] Technion Israel Inst Technol, Dept Mat Engn, IL-32000 Haifa, Israel
[2] Inst Werkstoffkunde & Werkstoffteckn, D-38678 Clausthal Zellerfeld, Germany
来源：
SURFACE & COATINGS TECHNOLOGY | 2000年 / 125卷 / 1-3期
关键词：
laser cladding; plasma cladding; shroud shelve; turbine blade;
D O I：
10.1016/S0257-8972(99)00603-9
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
A comparative study of two different techniques for the application of wear-resistant coatings for contact surfaces of shroud shelves of gas turbine engine blades (GTE) has been conducted. Wear-resistant coatings were applied on In713 by laser cladding with direct injection of the cladding powder into the melt pool. Laser cladding was conducted with a TRUMPF-2500, CW-CO, laser. The laser cladding was compared with commercially available plasma cladding with wire. Both plasma and laser cladded zones were characterized by optical and scanning electron microscopy. It was found that the laser cladded zone has a higher microhardness value (650-820 HV) compared with that of the plasma treated material (420-440 HV). This is a result of the significant reduction in grain size in the case of laser cladding. Unlike the plasma cladded zones, the laser treated material is free of micropores and microcracks. (C) 2000 Elsevier Science S.A. All rights reserved.
引用
收藏
页码：45 / 48
页数：4
相关论文
共 50 条
  • [1] Laser Cladding of Low Pressure Turbine Blades
    Brandt, M.
    Harris, J.
    Bishop, A.
    [J]. TRENDS IN WELDING RESEARCH, PROCEEDINGS, 2006, : 831 - +
  • [2] Individual laser cladding for high pressure turbine blades
    Weidlich, N.
    Grueninger, A.
    Meier, O.
    Emiljanow, K.
    Stippler, P.
    Seidel, F.
    [J]. 1ST EUCOMAS, 2008, 2028 : 227 - 233
  • [3] Laser cladding in repair of IN738 turbine blades
    Department of Materials Science and Engineering, National Taiwan University, Taipei 106, Taiwan
    不详
    [J]. International Heat Treatment and Surface Engineering, 2008, 2 (3-4) : 140 - 146
  • [4] LASER CLADDING AND INSPECTION FOR LIFE EXTENSION OF TURBINE-BLADES
    FAILOR, J
    [J]. MATERIALS EVALUATION, 1995, 53 (03) : 369 - 370
  • [5] Crack repair of single crystal turbine blades using laser cladding technology
    Rottwinkel, Boris
    Noelke, Christian
    Kaierle, Stefan
    Wesling, Volker
    [J]. PROCEEDINGS OF THE 3RD INTERNATIONAL CONFERENCE IN THROUGH-LIFE ENGINEERING SERVICES, 2014, 22 : 263 - 267
  • [6] Research for carbide composite laser cladding on steam turbine blades for geothermal power generation
    Yuya, Nakashima
    [J]. Yosetsu Gakkai Shi/Journal of the Japan Welding Society, 2021, 90 (04): : 259 - 261
  • [7] Evaluation of welding characteristics for manual overlay and laser cladding materials in gas turbine blades
    Hyung-Ick Kim
    Hong-Sun Park
    Jae-Mean Koo
    Chang-Sung Seok
    Sung-Ho Yang
    Moon-Young Kim
    [J]. Journal of Mechanical Science and Technology, 2012, 26 : 2015 - 2018
  • [8] Evaluation of welding characteristics for manual overlay and laser cladding materials in gas turbine blades
    Kim, Hyung-Ick
    Park, Hong-Sun
    Koo, Jae-Mean
    Seok, Chang-Sung
    Yang, Sung-Ho
    Kim, Moon-Young
    [J]. JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 2012, 26 (07) : 2015 - 2018
  • [9] Structure of MCrAlY laser cladding coatings deposited on single crystal alloy turbine blades
    Ferreira, PN
    Vilar, R
    Pina, JP
    da Silva, RC
    Sequeira, AD
    Marquis, FDS
    [J]. POWDER MATERIALS: CURRENT RESEARCH AND INDUSTRIAL PRACTICES III, 2003, : 247 - 258
  • [10] Development of laser powder cladding technology for restoration of heat-resistant nickel alloys turbine blades
    Korsmik, R. S.
    Turichin, G. A.
    Klimova-Korsmik, O. G.
    Alekseeva, E., V
    Novikov, R. S.
    [J]. BEAM TECHNOLOGIES AND LASER APPLICATION, 2018, 1109
12345