Explosive Welding of Titanium With Stainless Steel Using Bronze - Tantalum as Interlayer

被引：0
|
作者：
Maliutina, Iu. N. [1 ]
Bataev, A. A. [1 ]
Bataev, I. A. [1 ]
Skorokhod, K. A. [1 ]
Mali, V. I. [2 ]
机构：
[1] Novosibirsk State Tech Univ, Dept Mat Sci Engn, Novosibirsk, Russia
[2] Russian Acad Sci, Lavrentyev Inst Hydrodynam, Lab High Energy Dens Phys, Siberian Branch, Novosibirsk, Russia
来源：
2014 9TH INTERNATIONAL FORUM ON STRATEGIC TECHNOLOGY (IFOST) | 2014年
关键词：
explosive welding; titanium; stainless steel; interlayer; joining; ELECTRON-BEAM; MICROSTRUCTURES; INTERFACE; JOINTS; ALLOY;
D O I：
暂无
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Explosive welding was used to form reliable joining between commercially pure titanium and stainless steel. To prevent cracking at the interface induced by brittle intermetallic bronze - tantalum interlayer was used. Microstructural characterization of produced composite was analyzed using optical and scanning electron microscopy as well as energy dispersive analysis. Determination of structure has revealed no micro defects such as cracks in the composite. Intermediate layer of 5 mu m thick at the bronze - tantalum interface was formed. Structure of intermediate layer corresponds to highly dispersed mixture of tantalum and copper alloy particles. Ultimate strength of 4 layered composite is 1000 MPa that exceeds of ultimate strength of composite produced without interlayer. Analysis of fractograph indicates a high adhesion level between interactive materials.
引用
收藏
页码：436 / 439
页数：4
相关论文
共 50 条
  • [1] Friction Welding of Titanium to Stainless Steel Using Al Interlayer
    Muralimohan Cheepu
    Woo Seong Che
    [J]. Transactions of the Indian Institute of Metals, 2019, 72 : 1563 - 1568
  • [2] Friction Welding of Titanium to Stainless Steel Using Al Interlayer
    Cheepu, Muralimohan
    Che, Woo Seong
    [J]. TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2019, 72 (06) : 1563 - 1568
  • [3] Structural Properties of Interfacial Layers in Tantalum to Stainless Steel Clad with Copper Interlayer Produced by Explosive Welding
    Paul, Henryk
    Chulist, Robert
    Mania, Izabela
    [J]. METALS, 2020, 10 (07) : 1 - 17
  • [4] Control of energetic conditions by employing interlayer of different thickness for explosive welding of titanium/304 stainless steel
    Manikandan, P.
    Hokamoto, K.
    Fujita, M.
    Rahukandan, K.
    Tomoshige, R.
    [J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2008, 195 (1-3) : 232 - 240
  • [5] A New Approach for Using Interlayer and Analysis of the Friction Welding of Titanium to Stainless Steel
    Cheepu, Muralimohan
    Ashfaq, M.
    Muthupandi, V.
    [J]. TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2017, 70 (10) : 2591 - 2600
  • [6] A New Approach for Using Interlayer and Analysis of the Friction Welding of Titanium to Stainless Steel
    Muralimohan Cheepu
    M. Ashfaq
    V. Muthupandi
    [J]. Transactions of the Indian Institute of Metals, 2017, 70 : 2591 - 2600
  • [7] Explosive welding of titanium/stainless steel by controlling energetic conditions
    Manikandan, Palavesamuthu
    Hokamoto, Kazuyuki
    Deribas, Andrei A.
    Raghukandan, Krishnamurthy
    Tomoshige, Ryuichi
    [J]. MATERIALS TRANSACTIONS, 2006, 47 (08) : 2049 - 2055
  • [8] Joining of titanium/stainless steel by explosive welding and effect on interface
    Kahraman, N
    Gülenç, B
    Findik, F
    [J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2005, 169 (02) : 127 - 133
  • [9] DIFFUSION WELDING OF TITANIUM TO STEEL USING AN INTERLAYER OF VANADIUM
    KHARCHENKO, GK
    GORDONNA.AA
    [J]. AUTOMATIC WELDING USSR, 1966, 19 (06): : 85 - +
  • [10] Effect of the thickness of Cu interlayer on dissimilar laser welding of 304 stainless steel to tantalum
    Meng, Xiangyi
    Song, Fan
    Lin, Danyang
    Li, Haoyue
    Fu, Chao
    Xia, Hongbo
    Chen, Xi
    Wu, Laijun
    Chen, Bo
    Tan, Caiwang
    Song, Xiaoguo
    [J]. OPTICS AND LASER TECHNOLOGY, 2023, 157
12345